Disc Playback
Selecting a CD in the Disc changer
The CD function is automatically selected when Disc Skip is pushed.
To select a specific disc, press the corresponding DISC (1, 2, 3) button on the front panel or DISC SKIP on the remote control, until the required disc indicator flashes.
Result: All the discs will be played in turn, starting with the one selected.
• If you use the DISC (1, 2, 3) function when listening to the radio or to a tape, the system switches automatically to the CD mode.
• If the disc selected is not loaded, the next disc is played automatically.
Disc terminology
Titles and chapters (DVD-VIDEO)
•
These numbers are called "title numbers" and "chapter numbers".
Note
DVD VCD CD
• Playback starts automatically.
MP3 JPEG DivX
• Playback starts automatically.
• If the TV is on, a list of MP3s on the CD will appear on the TV screen.
• Depending on the content of the disc, the initial screen may appear different.
• Depending on the recording mode, some
• Table of contents of a
Tracks (Video and music CDs)
•Video and music CDs are divided into sections called "tracks".
Numbers are allotted to these sections. These numbers are called "track numbers".
Note • In this manual, the instructions marked with "DVD ( DVD )" are applicable to
Where a particular DVD type is mentioned, it is indicated separately.
•Depending on the content of the disc, the initial screen may appear different.
OPERATION
To temporarily pause playback, press PLAY/PAUSE during playback.
•To resume playback, press PLAY/PAUSE button again.
To stop playback,
press STOP during playback.
•If pressed once, “PRESS PLAY” is displayed and the
stop position will be stored in memory. If PLAY/PAUSE
( ) button or ENTER button is pressed, playback resumes from the stop position. (This function works only with DVDs.)
•If pressed twice, “STOP” is displayed, and if
PLAY/PAUSE ( ) button is pressed, playback starts from the beginning.
17 | 18 |