Connecting to a TV

Please be sure to turn off the power and unplug the power cord before moving or installing this unit. Please choose one of three video connection methods.

Method 1 Using Video Out (Good Quality)

 

1

Connect Video Out on the player to Video

2 Press the TV/VIDEO button on the remote of TV

 

In on your TV.

control to set the TV to "VIDEO".

 

Supplied

Method 2 Component Video (Best Quality)

Use this method if your TV have Pr,Pb and Y jacks.

If you television is equipped with Component Video inputs,connect a component video cable from the Pr,Pb and Y jacks on

the back panel of the system to the corresponding jacks on your television.

COMPONENT

IN

Not Supplied

• Composite Video: A single video signal that is a composite of the black-and-white

Note

information (Y) and the color information (C).

• S-Video: A video transmission standard that provides a sharper, brighter picture

P.SCAN (Progressive Scan) Function

Unlike regular Interlace Scan, in which two fields of picture information alternate to create the entire picture (odd scan lines, then even scan lines), Progressive Scan uses one field of information (all lines displayed in one pass) to create a clear and detailed picture without visible scan lines.

Press and hold P.SCAN button on the remote controller for over 5 seconds in

STOP mode.

 

CONNECTIONS

• Pressing and holding the button for over 5 seconds will select "Progressive Scan" and "Interlace

 

Scan" repetitively.

 

 

What is Progressive (or Non-Interlaced) Scanning?

 

Interlaced Scan (1 FRAME = 2 FIELDS)

Progressive Scan (FULL FRAME)

 

In interlaced-scan video, a frame consists of two

The progressive scanning method scans one full frame of

interlaced fields (odd and even), where each field

video consecutively down the screen, line by line.

contains every other horizontal line in the frame.

An entire image is drawn at one time, as opposed to the

The odd field of alternating lines is displayed first, and

interlaced scanning process by which a video image is

then the even field is displayed to fill in the alternating

drawn in a series of passes.

gaps left by the odd field to form a single frame.

The progressive scanning method is desirable for dealing

One frame, displayed every 1/25th of a second, contains

with moving objects.

two interfaced fields, thus a total of 50 fields are

 

displayed every 1/50th of a second.

 

The interlaced scanning method is intended for capturing

 

a still object.

 

Note • This function works only on TVs equipped with component video inputs (Y, Pr, Pb) that support Progressive Video. (It does not work on TVs with conventional component inputs, i.e., non-progressive

scan TVs.)

•Depending on the brand and model of your TV, this function may not work.

Selecting the Video Format

Turn off the main unit and then press NTSC/PAL on the Remote Control or REC/PAUSE on the Main Unit.

•By default, the video format is set to "PAL".

•Each time the button is pressed, the video format switches between "NTSC" and "PAL".

•Each country has a different video format standard.

•For normal playback, the video format of the disc must be the same as the video format of your TV.

11

than ordinary composite video by separating brightness and color signals.

12