Connecting the Video Out to your TV
Choose one of the three methods for connecting to a TV.
HDMI Function
CONNECTIONS
If your television is equipped with Component Video inputs, connect a Component video cable(not supplied) from
the Component Video Output (Pr, Pb and Y) jacks on the back of the panel of the main unit to the corresponding
jacks on your television.
METHOD 2 : Component Video ....... (Better Quality)
METHOD 3
(supplied) METHOD 2
METHOD 1
(supplied)
Connect the HDMI cable from the HDMI OUT jack on the back of the DVD Player to the HDMI IN jack on your TV.
METHOD 1 : HDMI ....... (Best Quality)
What is HDMI (High Definition Multimedia Interface)?
This device transmits a DVD video signal digitally without the process of converting to analog. You will get sharper digital pictures when
using an HDMI connection.
• Resolutions available for the HDMI output are 576p(480p).
• If the TV does not support the configured resolution, you will not be able to see the
picture properly.
•
When an HDMI cable is connected, composite and component video signals are not
output.
• See your TV owner's manual for more information on how to select the TV's Video
Input source.
The audio signals transmitted over the HDMI Cable can be toggled ON/OFF.
1In Stop mode, press the MENU button.
2
Press the Cursor button to move to <Audio> and then press the ENTER button.
3Press the Cursor button to move to <HDMI AUDIO> and then press
the ENTER button.
4Press the Cursor , button to select <ON> or <OFF> and then press
the ENTER button.
• ON : Both video and audio signals are transmitted over the HDMI connection cable, and audio
is output through your TV speakers only.
• OFF : Video is transmitted over the HDMI connection cable only, and audio is output through
the home theater speakers only.
Press the RETURN button to return to the previous level.
Press the EXIT button to exit the setup screen.
Setting the HDMI Audio
MOVE ENTER EXITRETURN
MOVE SELECT EXITRETURN
Connect the supplied video cable from the VIDEO OUT jack on the back of the main unit to the VIDEO IN jack on
your TV.
METHOD 3 : Composite Video....... (Good Quality)
13 14
•
Each time the button is pressed, the video format switches between "NTSC" and "PAL".
•
Each country has a different video format standard.
•
For normal playback, the video format of the disc must be the same as the video format of your TV.
Turn off the main unit and then press NTSC/PAL on the Remote Control or REC/PAUSE on the Main Unit.
Selecting the Video Format
• The default setting of this function is HDMI AUDIO OFF.
• HDMI AUDIO is automatically down-mixed to 2ch for TV speakers.
• BASS/TREBLE/ECHO/KEY CONTROL/P.SOUND/EQ/DSP function is not available when
HDMI AUDIO is ON.
• MIC output is not available while HDMI AUDIO ON.
•
This product operates in Interlace scan mode (480i Only) for Component Output.
1p~28p(Dx75)-NO GB-3-29 2007.4.23 10:35 AM Page 16