16

15

Connecting External Components

Connecting the FM Antennas

FM Antenna (supplied)
The cooling fan dissipates the heat generated inside the unit so that the unit can be operated
normally. The cooling fan is activated automatically to supply cool air to the unit.
Please observe the following cautions for your safety.
Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit
could rise and may damage it.
Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are
covered with a newspaper or cloth, heat may build up inside the unit and fire may result.)
Cooling Fan
FM antenna connection
1. Connect the FM antenna supplied to the FM 75COAXIAL terminal as a temporary measure.
2. Slowly move the antenna wire around until you find a location where reception is good, then
fasten it to a wall or other rigid surface.
If reception is poor, connect an outdoor antenna.
Before attaching a 75coaxial cable (with a standard type connector), disconnect the supplied FM
antenna.
CONNECTIONS
Connect Audio In on the DVD player to Audio Out on the external analog component.
Be sure to match connector colors.
1
Example: Analog signal components such as a VCR, Camcorder, and TV.

Connecting an External Analog Component

Audio Cable
If the external analog component
has only one Audio Out, connect
either left or right.
Press AUX to select AUX.
AUX’ appears in the display.
2
(not supplied)
1p~28p(Dx75)-NO GB-3-29 2007.4.23 10:35 AM Page 18