Setting the Clock
For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.
Switch the system | Press TIMER/CLOCK | Press ENTER. | |
on by pressing | |||
2 twice. | 3 The hour flashes. | ||
1 POWER button. | |||
| • CLOCK is displayed. | • Increase the hours : | |
|
| • Decrease the hours : |
When the correct
4 hour is displayed, press ENTER. The minutes flash.
•Increase the minutes :
•Decrease the minutes :
When the correct
5 time is displayed, press ENTER.
•"TIMER" appears in the display.
•The current time is now set.
Note
•You can display the time, even when you are using another function, by pressing TIMER/CLOCK once.
•You can also use
button on the Remote control instead of buttons in step 3,4.
15