Samsung MAX-VB550 To replay the CD/MP3-CD, Loading and Changing Compact Discs, To play Press

Loading and Changing Compact Discs

GB

The CD disc changer can contain up to three 12 cm or 8 cm compact discs without using an adapter.

Never force the compact disc carrousel when opening and closing the compartment.

Never press down or place objects on the carrousel.

Always treat your compact discs with care; refer, if necessary, to the section entitled “Precautions When Using Compact Discs” on page 27.

1	Switch the system on by pressing Standby/On.
2	Press the Open/Close(	) button on the front panel.
	Result: The compartment opens.

3 Place one or two discs in the front slots of the carrousel, with the label on the discs facing upwards.

Check that the compact disc has been correctly inserted in the holder before closing the compartment.

4	If you wish to load a third compact disc, press the Disc Change
	button on the front panel (or Disc Skip on the remote control).
	Result: The carrousel rotates by 120°.
5	Close the compartment by pressing the Open/Close(	) button
	again.

If you wish to start playing a disc directly, you can also proceed as follows.

To play...	Press...
Disc 1	VCD/CD (	) or Disc 1
Disc 2	Disc 2
Disc 3	Disc 3

Result: The compartment closes automatically and the disc selected starts playing.

6 To change or unload the compact disc changer, repeat Steps 2 to 5.

Keep the compartment closed whenever you are not using it, to prevent dust from entering.

You can load or unload compact discs when the radio, tape or auxiliary source function is selected.

The function will be automatically entered VCD/CD from the other source when you press CD Open/Close button.

	4
5	2,5
5
1
12

To replay the CD/MP3-CD

This is a player that enables the playback of audio CD, CD-R, CD-RW and MP3-CD and does not possess the function that saves MP3 files.

Do not use CDs of irregular shapes like heart or octagon shapes. The performance of the player may be degraded.

At least more than one CD should be inserted for playbacks.

1	Press the Standby/On button to switch on the power.
2	Press the VCD/CD(	) of the main unit to select the CD function.
3	Insert more than one CD or a MP3-CD.
4	Press the VCD/CD(	) button on the front panel or the	button
	of the remote control.

If there is more than one CD or an MP3-CD inserted, replays are then processed in order.

Your CD Player will take a few moments to scan through all the tracks recorded on a particular MP3-CD.

5 Adjust the volume according to needs with the following procedures.

Turn the Volume control on the front panel or

Press the VOL. + or – button on the remote control.

6 If it is desired to stop while the playback is processing, press the VCD/CD( ) button.

Press the VCD/CD( ) button once again to playback again.

7 To stop playback, press the button.

A new disc may be inserted in the remaining two compart- ments excluding the CD which is being played back. Press the Disc Changer button to open the CD tray. The revolving part does not turn during playbacks.

If there is not even one CD inserted in the CD tray, it is indicat- ed as “NO DISC”.

If the CD Repeat function is not selected, 3 CDs are played back which automatically stops.

5

2,4,6

1

7