Samsung MAX-VL85 instruction manual Connecting your System to the Power Supply

Where to Install Your

Mini-Compact System

To take full advantage of your new mini-compact system,

ollow these installation instructions before connecting the

unit.

Install the system on a flat, stable surface.

Never place this unit on carpeting.

Never place this unit in an outdoor area.

Maintain an open space of approximately 6 inches (15 cm) on the sides and rear of the system, for ventilation purposes.

Make sure that you have enough room to open the compact disc compartment easily.

Place the loudspeakers at a reasonable distance on either side of the system to ensure good stereo sound.

Direct the loudspeakers towards the listening area.

For optimum performance, make sure that both speakers are placed at an equal distance above the floor.

		Disc 1	Disc 2	Disc 3	Disc Change	Open/Close
						Power Surround
On/
Standby	Timer/
	Clock					Volume
	Timer/
	On/Off
R	AI Sleep
AUX	Demo	Band	Select/
						Subwoofer Level

	TUNER		VCD/CD			TAPE
							Sound	Echo
							Mode
								Mic Mixing
						Enter
Mute								MIC 1
	Program		Reverse
Mono/ST			Mode
Preset			Deck 1/2	Counter
Memory	CD Repeat			Reset				MIC 2
Phones
REC/Pause	Shuffle	CD	Dubbing		Menu		Menu
		Synchro
			Normal	High	Previous
					Down	Preset/Manual	Up

Push Eject Push Eject

Connecting your System to the Power Supply

GB

The main lead must be plugged into an appropriate socket.

Before plugging your system into a main socket, you must check the voltage setting (OPTIONAL). If the voltage of the socket does not correspond to the setting on the rear of the unit, you may seriously damage your system.

1 Check the position of the Voltage selector on the rear of the system (OPTIONAL).

2	Plug the main lead (marked AC Cord on the rear of the system) into
	an appropriate socket.
3	Press the On/Standby button to switch your mini-compact system on.

VIDEO
OUT
R	L
AUX IN
	VOLTAGE
	SELECTOR

7