Searching for and Storing the Radio Stations
GB
You can store up to:
15 FM stations 
15 AM stations
15 FM stations
OPTION
6 |
8 AM(MW) stations OPTION
7 LW stations
| 15 FM stations |
|
|
| |
|
|
|
| ||
| 5 | MW stations |
|
| OPTION |
|
|
| |||
| 5 | SW1 stations |
|
| |
|
|
| |||
|
|
|
| ||
| 5 | SW2 stations |
|
|
|
|
|
|
|
|
|
1 | Switch the system on by pressing Standby/On. | ||||
2 | Select the TUNER function by pressing TUNER. | ||||
3 | Select the required frequency band by pressing TUNER (Band) | ||||
| again on the front panel or Band on the remote control. | ||||
| Result: The appropriate indication is displayed: | |||
| FM |
|
| Frequency Modulation |
| AM(MW) |
|
| Medium Wave |
| LW(OPTION) |
| Long Wave | |
| SW1, SW2(OPTION) | Short Wave | ||
4 |
|
|
|
|
To search for a |
|
| Press Tuning Mode on the front panel | |
| station... |
|
| or on the remote control |
|
|
|
|
|
| Manually |
|
| One or more times until MANUAL is |
|
|
|
| displayed. |
| Automatically |
|
| One or more times until AUTO is |
|
|
|
| displayed. |
5 Select the station to be stored by: | ||||
| Turning the Multi Jog knob to the right or to the left to increase or | |||
| decrease the frequency respectively | |||
| or |
|
|
|
| Pressing Tuning | or | on the remote control | |
| To scroll through the frequencies faster when searching | |||
| manually, hold down the Tuning Mode Down or Up buttons. | |||
| The automatic search procedure may stop on a frequency that | |||
| does not correspond to a radio station. If this happens, use the | |||
| manual search mode. |
|
| |
6 Adjust the volume by: |
|
|
| |
| Turning the Volume knob on the front panel | |||
| or |
|
|
|
| Pressing the VOL. + or – buttons on the remote control | |||
7 Select the FM stereo or mono mode by pressing Mono/ST. | ||||
8 | If you do not want to store the radio station found, revert to Step 4 | |||
| and search for another station. |
|
| |
| Otherwise: |
|
|
|
| a Press Memory. |
|
|
|
| Result: The PRGM is displayed for a few seconds. | |||
| b Press Tuning Mode Down and Up to assign a program number | |||
| between 1 and 15. |
|
|
|
| c Press Memory to store the radio station. | |||
| Result: PRGM is no longer flashed and the station is stored. | |||
9 To store any other radio frequencies required, repeat Steps 3 to 8.
The PROGRAM function can be used to assign a new station to an existing program number.
8 | 2,3 |
1 | 5 |
| 4 |
5,8 | 5,8 |
7 |
|
| 6 |
| 4 |
5,8 | 5,8 |
| 6 |
18
