Samsung AH68-01236A Listening to a Cassette, CD Synchro Record Feature, Recording a Compact Disc

Listening to a Cassette

GB

Always treat your cassettes with care; refer, if necessary, to the section entitled “Precautions When Using Audio Cassettes” on page 26.

1	Switch the system on by pressing the Standby/On button.
2	Select the TAPE function by pressing TAPE on the front panel.
3	Open either cassette deck 1 or 2 by pushing and releasing the deck
4	cover where Push Eject (			) is written.
	Insert the pre-recorded cassette with the open edge of the tape
	facing downward.
5	Close the deck by pushing on it until it clicks into place.
	Result: Depending on the deck selected, the 1 or 2 indication is
		displayed in front of the counter number.
6	If you have inserted two cassettes, press Deck 1/2 on the front panel
	or directly the Deck 1/2 button on the remote control to select the
	cassette to be played.
	Result: Depending on the deck selected, the TAPE 1 or TAPE 2
		indication is displayed.
7
	To listen to...			Press ...
	Side A		TAPE (		) once	DECK1 and DECK2
	Side B		TAPE (		) twice	DECK2 ONLY
	Result: The cassette starts playing.
8	When the cassette is stopped, select one of the following functions
	as required.
		Main Unit
	To...					Press ...

Rewind the cassette

Fast-forward the cassette

Remote Control

To...Press ...

Rewind the cassette

Fast-forward the cassette

9
	To...	Press...
	Stop the playback or search

1
	2,7
6
8	9	8

CD Synchro Record Feature

You can record a compact disc on a cassette in two different ways:

Synchronised recording

Direct recording

This feature enables you to synchronize the start of the recording with the start of the disc or track of your choice.

1	Switch the system on by pressing Standby/On.
2	Insert a blank cassette in Deck 2.
3	Select the VCD/CD function by pressing VCD/CD on the front panel.
4	Load a compact disc.
5	Select the required disc.
6	Select the required track and press CD Synchro or press CD
	Synchro directly to start recording at the beginning of the disc.
	Result: “REC” is displayed in red and recording starts.
7	To stop recording, press	.

1		3
	6	7

Recording a Compact Disc

The direct recording mode enables you to start recording with any track on the compact disc.

You can only record on cassettes in Deck 2.

You do not need to adjust the volume, as it has no effect on the record- ing.

1	Switch your system on by pressing Standby/On.
2	Insert a blank cassette in Deck 2.
3	Select the VCD/CD function by pressing VCD/CD on the front panel.
4	Load the compact disc.
5	Select the required disc.
6	Select the required track on the compact disc and press			on the front
	panel or	on the remote control to set the compact disc player to Pause
	mode.
7	Press the REC/Pause.
	Result: “REC” is displayed in red and recording starts.
8	Press the		to start playing the track.

Result: The track is recorded on the cassette.

9 To stop recording, press .
1	3,6,8
7	9

20