GB
24
You can connect a set of headphones to your mini-compact
system so that you can listen to music or radio programmers
without disturbing other people in the room. The headphones
must have a 3.5øjack or an appropriate adapter.
Connect the headphones to the PHONES jack on the front panel.
Result: The loudspeakers are no longer used to output the sound.
Prolonged use of headphones at a high volume may damage
your hearing.

Connecting Headphones

While listening to a compact disc or a cassette, you can
set the system to switch off automatically
Example: You wish to go to sleep to music.
Press AI SLEEP.
Result: playback starts and the following indications are displayed:
Press AI SLEEP one or more times to indicate how long the
system should continue playing before it switches off:
At any time, you can:
Check the remaining time by pressing AI SLEEP
Change the remaining time by repeating Steps 1and 2
Press AI SLEEP one or more times until AI SLEEP is displayed.
Result: The system will automatically switch off at the end of the disc
or cassette.
To cancel SLEEP function, press AI SLEEP one or more times until
OFF is display.

Setting the System to Switch off

Automatically

1
2
3
4
90 MIN
MAXX BASS utilizes the principle of the missing fundamental
,which creates the sensation of low frequencies by generating
a carefully calculated series of harmonics designed to simu-
late the auditory experience caused by the missing fundamen-
tal pitch. These harmonics extend the virtual frequency
response up to two-third or 11/2 octaves below the physical
speaker cutoff frequency without perceived distortion or
increased power consumption.MAXX BASS function stresses
low tones providing thudding sound effects.
press MAXX BASS button on the front panel to select:
➞
“M-BASS 1
➞
M-BASS 2
➞
M-BASS 3
➞
M-BASS 4
➞
OFF”.
You can select the level of low tones you desire.
Super BASS function stresses low tones providing thudding
sound effects.
press S.BASS button on the front panel to select:
➞
“S-BASS 1
➞
S-BASS 2
➞
S-BASS 3
➞
S-BASS 4
➞
OFF”.
You can select the level of low tones you desire.
1
2
1
2

MAXX BASS Level Function

(MAX-VS940/VS990)

S.BASS Level Function

(MAX-VS950)

The microphone enables the user to mix in his or her
vocals to sing-along with the music.
Preparation
Plug the microphone with a 6.3ø mic jack into
microphone terminal.
Turn the MIC LEVEL knob to adjust the MIC1, MIC2 volume.
Press ECHO button to select ECHO1,ECHO2,ECHO OFF.
The POWER SURROUND function is not available if plugging the
Microphone into MIC jacks.

Microphone Function

1
2
.
/
/
2
1
MAX-VS990 GB(So)19~30 11/10/03 13:32 Page 24