Samsung MAXWB650RH/ELS manual Listening to a Cassette, CD Synchro Record Feature

Listening to a Cassette

Always treat your cassettes with care; refer, if necessary, to the section entitled “Precautions When Using Audio Cassettes” on page 23.

1	Switch the system on by pressing the Standby/On button.
2	Select the TAPE function by pressing TAPE on the front panel.
3	Open either cassette deck 1 or 2 by pushing and releasing the deck
4	cover where Push Eject (		) is written.
	Insert the pre-recorded cassette with the open edge of the tape
	facing downward.
5	Close the deck by pushing on it until it clicks into place.
	Result: Depending on the deck selected, the 1 or 2 indication is
	displayed in front of the counter number.
6	If you have inserted two cassettes, press Deck 1/2 on the front panel
	or directly the Deck 1/2 button on the remote control to select the
	cassette to be played.
	Result: Depending on the deck selected, the TAPE 1 or TAPE 2
	indication is displayed.
7
	To listen to...	Press ...
	Side A	TAPE (		) once
	Side B	TAPE (		) twice
	Result: The cassette starts playing.
8
	To...			Press...

Listen to the track of or the appropriate

your choicenumber of times Stop the playback or search

If there are very quiet passages on a track, the automatic search function may stop before the end of the track. Also, a very short space between two tracks may not be detected.

9 When the cassette is stopped, select one of the following functions as required.

To... Press ...

Rewind the cassette

Fast-forward the cassette

2,7	6
	8,9	8,9
1		8

CD Synchro Record Feature

GB

You can record a compact disc on a cassette in two different ways:

Synchronised recording

Direct recording

This feature enables you to synchronize the start of the recording with the start of the disc or track of your choice.

1	Switch the system on by pressing Standby/On.
2	Insert a blank cassette in Deck 2.
3	Select the CD function by pressing CD on the front panel.
4	Load a compact disc.
5	Select the required disc.
6	Select the required track and press CD Synchro or press

CD Synchro directly to start recording at the beginning of the disc. Result: REC and CD-SYNCare displayed on window displayer and recording starts.

7 To stop recording, press .
3	6
1	7

Recording a Compact Disc

The direct recording mode enables you to start recording with any track on the compact disc.

You can only record on cassettes in Deck 2.

You do not need to adjust the volume, as it has no effect on the recording.

1	Switch your system on by pressing Standby/On.
2	Insert a blank cassette in Deck 2.
3	Select the CD function by pressing CD on the front panel.
4	Load the compact disc.
5	Select the required disc.
6	Select the required track on the compact disc and press			on the front panel
7	or	on the remote control to set the compact disc player to Pause mode.
	Press the REC/Pause.
8	Result: REC is displayed in red and recording starts.
	Press the		to start playing the track.

Result: The track is recorded on the cassette.

9 To stop recording, press .
3,6,8
1	7	9
		17