Checking or Changing Programmed CD Tracks
GB
You can check or change your selection of tracks at any time.
1 | Press |
| once if you have started listening to the selection. |
| |||
| |||
| |||
2 | Press Program. | ||
| Result: The following indications are displayed: | ||
(CH = Check, 01=Program No, DI = Disc No, – – = Track No on the disc)
If you have already programmed 24 tracks, CH is displayed instead of PR when you press Program.
3 | Press Program again. | |||||
| Result: The first track selected is displayed, together with the letter CH (Change). | |||||
4 | Press Program one or more times until the track to be changed is displayed. | |||||
5 | If necessary, press the corresponding Disc (1, 2, 3) button to change discs. | |||||
6 | Press |
| and |
|
| or turn Multi Jog to select a different track. |
|
|
| ||||
|
| |||||
|
|
| ||||
7 | Press Program to confirm your change. | |||||
8 Press CD (
) to start listening to the selection. Result: The first track selected is played.
| 5 | |
8 |
| |
| 6 | |
6 | 6 | |
| ||
1 | 2,3,4,7 | |
1 | 8 | |
2,3,4,7 | 6 | |
6 | ||
| ||
16 |
|
Searching for and Storing the Radio Stations
You can store up to:
15 FM stations
8 MW stations 7 LW stations
1 | Switch the system on by pressing Standby/On. | |
2 | Select the TUNER function by pressing TUNER. | |
3 | Select the required frequency band by pressing TUNER (Band) | |
| again on the front panel or Tuner (Band) on the remote control. | |
| Result: The appropriate indication is displayed: | |
| FM | Frequency Modulation |
| AM(MW) | Medium Wave |
| LW | Long Wave |
4 |
|
|
To search for a | Press Tuning Mode | |
| station... |
|
| Manually | One or more times until MANUAL is |
|
| displayed. |
| Automatically | One or more times until AUTO is |
|
| displayed. |
5 | Select the station to be stored by: | |
Turning the Multi Jog knob to the right or to the left to increase or decrease the frequency respectively
or
Pressing Tuning 
or 
on the remote control
To scroll through the frequencies faster when searching manually, hold down the Tuning Down or Up buttons.
The automatic search procedure may stop on a frequency that does not correspond to a radio station. If this happens, use the manual search mode.
6 Adjust the volume by:
Turning the Volume knob on the front panel or
Pressing the VOL. + or – buttons on the remote control
7 Select the stereo or mono mode by pressing Mono/ST. | |
| 6 |
2,3 | 5 |
5 | 5 |
1 |
|
| 4 |
| 4 |
5 | 5 |
7 |
|
