Operation

Reheating Automatically

To reheat food, select the type of dish and the number of servings you want to reheat, and the microwave automatically sets the reheating time.

1.Press the Auto Reheat button repeatedly to select the type of dish you wish to reheat. The initial serving size for each dish is one serving.

You can select up to four cups for casseroles and pasta reheat. Only one serving is available for a plate of food.

The display shows the dish and quantity you have chosen.2.Use the number buttons to increase the serving size. For example, for three

servings, press the 3 button(Refer to the Auto Reheat Chart below for the servings). The display shows the number of servings you

have selected:3.Press the Start button. The display will show Cooking Time.

Auto Reheat Chart

Item

Weight

 

Remarks

 

 

 

 

Plate of food

1 serving

•

Use only pre-cooked, refrigerated foods.

 

 

• Cover plate with vented plastic wrap or wax

 

 

 

paper.

 

 

•

Contents

 

 

 

- 85-110 g meat, poultry or fish

 

 

 

( up to 170 g with bone)

 

 

 

- ½ cup starch

 

 

 

(potatoes, pasta, rice, etc.)

 

 

 

- ½ cup vegetables

 

 

 

(about 85-110 g)

 

 

 

 

Casserole

 

•

Use only refrigerated foods.

 

 

• Cover with lid or vented plastic wrap.
Pasta Reheat

 

1-4 Cups

•

Stir foods well before serving.

 

 

 

 

 

Setting and Using the Custom Cook Button

The Custom Cook button memorizes the time and power setting for a particular food.

Programming the Custom Cook Button

1.Press the Custom Cook button. Press the button twice to delete the previous Custom setting. The display shows “CUS”.

2.Use the Number buttons to enter the amount of cooking time. The display will show the amount of time you have set.

3.Press Power Level and use the Number buttons to enter the power level. The display will show the power level you have set. You can set the Power Level from 0 to 9

1

= warm

2

= low

3

= defrost

4

= medium low

5

= medium

6

= simmer

7

= medium high

8

= reheat

9

= sauté

0

=high
4.Press the Custom Cook button again.

Using the Custom Cook button

Press the Custom button after memorizing a recipe, the press Start button. You can check the power level while cooking is in progress by pressing the Power Level button.

Setting Cooking Times & Power Levels

Your microwave allows you to set up to two different stages of cooking, each with its own time length and power level. The power level button lets you control the heating intensity from Warm (1) to High (0).

One-stage Cooking

For simple one-stage cooking, you only need to set a cooking time. The power level is automatically set to High. If you want to set the power to any other level, you must set it using the Power Level button.

1.Use the number buttons to set a cooking time. You can set a time from one second to 99 minutes, 99 seconds. To set a time over one minute, enter the seconds too. For example, to set 20 minutes, enter 2, 0, 0, 0 .

2.If you want to set the power level to something other than High, press the Power Level button, then use the number buttons to enter a power level.

Power Levels:
1 = PL:10(Warm)

6

= PL:60(Simmer)
2 = PL:20(Low)

7

= PL:70

(Medium High)

3 = PL:30(Defrost)

8

= PL:80(Reheat)
4 = PL:40(Medium Low)

9

= PL:90(Sauté)
5 = PL:50(Medium)

0

= PL:Hi(High)

3.Press the Start button to begin cooking. If you want to change the power level, press Pause/Cancel before you press Start, and re-enter all of the instructions.

Some recipes require different stages of cooking at different temperatures. You can set multiple stages of cooking with your microwave.

Multi-stage Cooking

1.Follow steps 1 and 2 in the “One-Stage Cooking” section on the this page. When entering more than one cooking stage, the Power Level button must be pressed before the second cooking stage can be entered.

To set the power level at High for a stage of cooking, press the Power Level button twice.

2.Use the number buttons to set a second cooking time.

3.Press the Power Level button, then use the number buttons to set the power level of the second stage of cooking.

4.Press Start to begin cooking.

You can check the Power Level while cooking is in progress by pressing the Power Level button.

Microwave oven has priority independently from selection of Multi-phase.

Demonstration Mode

You can use the Demonstration Mode to see how your microwave oven operates without the oven heating.

1.Hold the 0 button and then press the 1 button. To turn demo mode off, repeat step 1 above.

7