2. 15
Printer Setup
Macintosh Installation
1. Make sure that the Macintosh and your printer are connected to each
other with the proper cable. Turn on the printer and Macintosh
computer.
2. Insert the ML-6100 CD-ROM shipped with your printer into your
CD-ROM drive.
3. Open the CD-ROM icon.
4. Open the XX folder (where XX indicates the language code*), then
open the PS folder, and then the Macfolder.
5. Drag and drop the ML-6100.ppd file to the Printer Descriptions
folder located inside the Extensions folder.
6. Open Chooser in the Apple menu.
7. Click on LaserWriter8 (provided with your Macintosh). Then the
name of your printer appears, ML-6100.
8. Click on the ML-6100 printer.
9. Click on the Setup button.
Note: If there is a Create button, click on it. The installation is completed, and
you do not need to proceed with the following steps.
10. Click on the Auto Setup button.
Note: The ML-6100.ppd file will be installed automatically. If Auto Setup does
not complete successfully, click Select PPDand choose ML-6100.ppd.
If prompted for CD, click Cancel.
11. Make sure the PPD file is installed correctly.Click on the OK button,
then close Chooser.
* Refer to Chapter 7 for language codes.