Samsung ML-1200 manual Clearing Paper Jams, Output Area, Input Area

Clearing Paper Jams

Occasionally, paper can become jammed during a print job. Some of the causes include:

•The paper tray is loaded improperly or overfilled.

•The paper tray has been pulled out during a print job.

•The top cover has been opened during a print job.

•Paper that does not meet paper specifications has been used. See “Paper Specifications” on page A.2.

•Paper that is outside of the supported size range has been used. See “Paper Specifications”.

If a paper jam occurs, the Paper and the Error lights remain lit on the control panel. Find and remove the jammed paper. If the location of the paper jam is not obvious, look inside the printer.

Output Area

Note: Paper jams in this area may result in loose toner on the page. If you get any toner on your clothes, wash them in cold water as hot water will set the toner into the fabric.

1 Pull the jammed paper carefully from the output stacker.

Clearing Paper Jams

5 If paper is jammed in the face-up output slot, carefully remove the paper as shown.

2 Open and close the front cover. Printing can be resumed.

Input Area

Note: If paper has entered the toner cartridge area, follow the instructions on page 7.8.

1 Carefully pull the jammed paper out of the input tray.

7.6 PROBLEM SOLVING PROBLEM SOLVING 7.7