Samsung ML-2550 Series manual Problem, Vertical repetitive Defects

Problem

Vertical repetitive

defects

AaBbCc

AaBbCc

AaBbCc

AaBbCc

AaBbCc

Background

scatter

A

Misformed characters

Page skew

AaBbCc

AaBbCc

AaBbCc

AaBbCc

AaBbCc

Solution

If marks repeatedly appear on the printed side of the page at even intervals:

•The toner cartridge may be damaged. If a repetitive mark occurs on the page, print a cleaning sheet several times to clean the cartridge; see page 6.9. After the printout, if you still have the same problems, install a new toner cartridge. See “Installing the Toner Cartridge” on page 2.4.

•Parts of the printer may have toner on them. If the defects occur on the back of the page, the problem will likely correct itself after a few more pages.

•The fusing assembly may be damaged. Contact a service representative.

Background scatter results from bits of toner distributed on the printed page.

•The paper may be too damp. Try printing with a different batch of paper. Do not open packages of paper until necessary so that the paper does not absorb too much moisture.

•If background scatter occurs on an envelope, change the printing layout to avoid printing over areas that have overlapping seams on the reverse side. Printing on seams can cause problems.

•If background scatter covers the entire surface area of a printed page, adjust the print resolution through your software application or the printer properties.

•If characters are improperly formed and producing hollow images, the paper stock may be too slick. Try a different paper. See “Paper Specifications” on page G.3.

•If characters are improperly formed and producing a wavy effect, the scanner unit may need service. Verify that it also occurs on a demo page (see page 2.14). For service, contact a service representative.

•Check the paper type and quality. See “Paper Specifications” on page G.3.

•Ensure that the paper or other material is loaded correctly and the guides are not too tight or too loose against the paper stack.

7

SOLVING PROBLEMS 7.17