Samsung MM-B5, MMB5RH/ELS manual Setting the Clock, Selecting a Track, Listening to a Compact Disc

Setting the Clock

GB

Your system is equipped with a clock which allows you to turn your system on and off automatically.

You should set the clock:

When you first purchase the micro-component system

After a power failure

After unplugging the unit

For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.

1	Switch the system on by pressing On/Standby (	) .
2	Press Timer/Clock twice.
	Result: CLOCK is displayed.
3	Press Program/Set.
	Result: The hour flashes.
4	To...	Press...
	Increase the hours
	Decrease the hours
5	When the correct hour is displayed, press Program/Set.
	Result: The minutes flash.
6	To...	Press...
	Increase the minutes
	Decrease the minutes
7	When the correct time is displayed, press Program/Set.
	Result: The clock starts and is displayed, even when the system is in

standby mode.

You can display the time, even when you are using another function, by pressing Timer/Clock once.

7 If it is desired to pause while the playback is processing, press the CD( ) button.

Press the CD( ) button once again to play back again.

8 To stop playback, press the Stop ( ) button.

			VOL.	6
				6
	Down	Tuning Mode	Up
TUNER	CD		EQ
Band	1, 5, 7	8
			S.Bass
		REC/Pause	CD Sync.
	RDS	Repeat	REV Mode

Selecting a Track

You can select the track you wish to listen to, either when the compact disc player is stopped or when a disc is playing.

To start playback at the beginning of the... Press...

Next track once

Current track	once
Previous track	twice

On/Standby		Timer	Timer/
		On/Off	Clock
	1	Program	2
EQ Preset	Power
	Sound	/Set	AUX
		Mono/ST.	TUNER
Sleep	CD Repeat	3,5,7
			Band

	VOL.
	Tuning
CD	Mode	CD
4,6	VOL.	4,6

Track of your choice or the appropriate number of times.

VOL.

Tuning

Mode

CDCD

VOL.

Listening to a Compact Disc

Do not use CDs of irregular shapes like heart or octagon shapes. The performance of the player may be degraded.

1	Press the CD(	)button on the main unit and select CD.
2	Open the CD door by pushing on the top of the main unit marked
	Push Open (	).
	Result: The CD door is opened.
3	Place the CD on the compartment so that the CD label faces upward.
4	Close the CD door.
	Result: Number of tracks and the total playback time are shown on
	the display.
5	Press the CD(	) button for playback.
6	Adjust the volume according to needs with the following procedures.
	Press the VOL. + or –button.

Searching for a Specific Music Passage on a CD

When listening to a compact disc, you can quickly search for a specific music passage on a track.

To search through the tracks...	Press and hold down...
Forwards	for at least one second
Backwards	for at least one second

It is recommended that you turn the volume down before using this function.

VOL.

Tuning

Mode

CDCD

VOL.

10