ENG
Connecting an iPod
You can listen to audio from an iPod through the main unit. For iPod operation with this Micro System, see this page and page 9.
iPod |
iPod |
(supplied) |
1.Connect the iPod dock connector to the iPod jack on the Micro System.
2.Press the PORT button on the remote control to select IPOD to listen to music.
•You can also use the FUNCTION button on the main unit.
The mode switches as follows :
MP3/CD ➞ TUNER ➞ USB ➞ IPOD ➞ AUX.
A iPod is for audio iPod.
Depending on the type of iPod, you may need to insert one of the dock slots which are provided when you purchase the iPod. (see next page).
Adjust the volume to a moderate level before you connect your iPod and Micro System.
When the unit is powered on and you connect an iPod, the unit will charge your iPod's battery.
You can enjoy playback of your iPod using the supplied remote control.
Listening to Music (iPod function)
You can play music fi les stored in the iPod player by connecting it to the Micro Component system.
1.Connect the iPod dock connector to the iPod jack on the Micro System.
2.Place the iPod in the Dock.
•Your iPod is automatically turned on.
3.Press the PORT button on the remote control to select IPOD mode.
•If the iPod player is connected to the Micro System, each time you press the the PORT button, it will be toggled in
the order of USB IPOD.
4.After connecting iPod, Audio clip of iPod is played automatically.
5.You can use the remote control or main unit to control simple playback functions such as PLAY, PAUSE, STOP, 
/
, 
/
and REPEAT.
See page 9 for compatible iPods.
Compatibility depends on the software version of your iPod.
iPod |
(supplied) |
8 |
