Samsung MM-C6R/ELS, MM-C6Q/XFO manual Selecting a Stored Station, Improving Radio Reception

Checking and Changing Programmed Tracks

GB

You can check and change your selection of tracks at any time.

You must have selected at least one track.

1	Press STOP ( ) once if you have started listening to the selection.
2	Press PROGRAM / SET.
3	Each time you press Program/Set, the next selection is displayed.
	Press PROGRAM / SET one or more times until the track to be changed
	is displayed.
4	Press	or	to select the new track.
5	Press PROGRAM / SET.
6	Press MP3-CD(		) to start listening to the selection.
	Result: The first track selected is played.

You can change one or more tracks in your initial selection

Searching for and Storing the Radio Stations

You can store up to:

15 FM stations

8 MW station

7 LW station

1		Switch the system on by pressing Standby/On (				)
2		Select the TUNER function by pressing TUNER/BAND.
3		Select the required frequency band by pressing TUNER/BAND again.
		Result:The appropriate indication is displayed:
		FM		Frequency Modulation
		AM(MW)		Medium Wave
		LW		Long Wave
4
	To search for a station ...		Press	Tuning Mode		...
		Manually	One	or more	times until MANUAL is
			displayed.
		Automatically	One	or more	times until AUTO is
			displayed.

Searching for and Storing the Radio Stations(continued)

8	If you do not want to store the radio station found, revert to Step 4 and
	search for another station.
	Otherwise:
	a Press PROGRAM/SET
	Result: The program number is displayed for a few seconds.
	b Press TUNING	and	to assign a program number between 1
	and 15.
	c Press PROGRAM/SET to store the radio station.
	Result: The program number is no longer displayed and the station is
	stored.
9	To store any other radio frequencies required, repeat Steps 3 to 6.

The PROGRAM function can be used to assign a new station to an existing program number.

Selecting a Stored Station

GB

You can listen to a stored radio station as follows:

1		Switch the system on by pressing Standby/On (			).
2		Select the TUNER function by pressing TUNER/BAND .
3		Select the required frequency band by pressing TUNER/BAND.
4		Select the radio station as follows.
	To listen to ...		Press ...
		A stored station	........................... a Press the TUNING MODE button
			until “PRESET” is displayed.
			b TUNING	and	to select the
			required station.

Press TUNING MODE again to exit the stored station selection function.

2,3,5

4 1 4

6

5	Select the station to be stored by pressing			,	on the front panel
	to decrease or increase the frequency respectively.
	To scroll through the frequencies faster when searching manually,
	hold down the	,	on the front panel .
	The automatic search procedure may stop on a frequency that does
	not correspond to a radio station.
6	If this happens, use the manual search mode.
	Adjust the volume by:

Turning the VOLUME knob on the front panel or

Pressing the VOLUME+, - button on the remote control. 7 Select the FM stereo or mono mode by pressing MO/ST on

the remote control.

1
	2,3
5	4	5	6
2,3			7

8

8

8

1

2,3

4

+10

4

4

Improving Radio Reception

You can improve the quality of radio reception by:

Rotating the FM or AM(MW) aerial

Testing the positions of the FM and AM(MW) aerials before fixing them permanently

If reception from a specific FM radio station is poor, press MO/ST to switch from stereo mode to mono. The quality of the sound will be improved.

2,3

14 15