Selecting the cassette Playback Mode

Selecting the Cassette Playback Mode

Timer Function

• The timer enables you to switch the system on or off at specific times.

• If you no longer want the system to be switched on or off automatically, you must cancel the timer.

• Before setting the timer, check that the current time is correct.

• For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.

Example: You wish to wake up to music every morning.

Your micro component system has three cassette playback modes which enable you to listen to both sides of a cassette

automatically.

Press REVERSE MODE until the appropriate symbol is displayed.

Switch the system

Press

TIMER/CLOCK

on by pressing

until TIMER is

1 POWER.

2 displayed.
Press the ENTER
3 button.

•ON TIME is displayed (instead of the equalizer symbols) for a few seconds, followed by any switch-on time already set; you can set the timer switch-on time.

•When the display indicates...The micro component system plays back

One side of the selected cassette and then stops.

One side of the cassette.

The other side of the cassette and then stops.

Both sides of the cassette indefinitely until you press stop.

Set the timer

 

 

Set the timer

 

4 switch-on time.

 

 

5 switch-off time.

 

a. Set the hour by pressing

or

 

a. Set the hour by pressing

or

button.

 

 

button.

 

b. Press ENTER.

 

 

b. Press ENTER.

 

• The minutes flash.

 

 

• The minutes flash.

 

c. Set the minutes by pressing

or

 

c. Set the minutes by pressing

or

button.

 

 

button.

 

d. Press ENTER.

 

 

d. Press ENTER.

 

• OFF TIME is displayed (instead

 

• VOL 10 is displayed, where 10

of the equalizer symbols) for a few

 

corresponds to the volume

seconds, followed by any switch-

 

already set.

 

off time already set; you can now

 

 

 

set the timer switch-off time.

 

 

 

Press or button
6 to adjust the volume level and press
ENTER.

•The source to be selected is displayed.

49

Press or button

8

Press ENTER to
to select the source to
confirm the timer.
be played when the

 

7 system switches on.

 

•TAPE (cassette) : Insert a cassette tape.

•TUNER (radio) : a Press ENTER. b Select a preset

station by pressing Tuning or .

•CD (compact disc) : Load a compact disc.

• USB :Connect the USB.

Note

•If the timer switch on and off times are identical, the word ERROR is displayed.

Press POWER to
9 set the system to standby mode.

• is displayed to the top-right of the time, indicating that the timer has been set.

•The system will switch on and off automatically at the required times.

50

MISCELLANEOUS