Connecting External Components

Connecting an External Analog Component

Example: Analog signal components such as a VCR, Camcorder, and TV.

(not supplied)

Audio Cable

If the external analog component has only one Audio Out, connect either left or right.

1 Connect AUX IN on the player to Audio Out on the external analog component.

•Be sure to match connector colors.

2 Press AUX to select AUX.

• ‘AUX’ appears in the display.

Connecting the FM Antennas

FM Antenna (supplied)

1 Connect the FM antenna supplied to the FM 75Ω COAXIAL Jack.

2 Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface.

Note • This unit does not receive AM broadcasts.

Cooling Fan

The cooling fan supplies cool air to the unit to prevent overheating.

Please observe the following cautions for your safety.

• Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit could rise and may damage it.

•Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a newspaper or cloth, heat may build up inside the unit and fire may result.)

ENG

CONNECTIONS

17

18