Samsung MM-DG35T/XSA manual CD Ripping Function, Timer Function, Clock until

CD RIPPING Function

You can rip a compact disc as a MP3 file on the USB

This feature enables you to ripping with the start of the disc or track of your choice.

Timer Function	ENG
• The timer enables you to switch the system on or off at specific times.
• If you no longer want the system to be switched on or off automatically, you must cancel the timer.
• Before setting the timer, check that the current time is correct.
For each step, you have a few seconds to set the required options.
• If you exceed this time, you must start again.

1 Switch the system

Connect the

Load a compact

Example: You wish to wake up to music every morning.

on by pressing

POWER.

Press CD

4 RIPPING button on remote control to starting ripping.

¡If the system is playing state, press this button,

2 USB.

To stop ripping, press

5 STOP()button.and then automatically create and save as the MP3 file.

3	disc(Digital
	Audio).

Press the OPEN/CLOSE button to open the CD door.

Insert a CD and press the OPEN/CLOSE button to close the CD door.

Use the CD selection ( ) buttons to select the desired song.

Switch the system	2	Press TIMER/
		CLOCK until
on by pressing		TIMER is
1 POWER.		displayed.

3 Press the ENTER button.

•TIME ON is displayed for a few seconds, followed by any switch- on time already set; you can set the timer switch-on time.

“TRACK RIPPING” is displayed and CD

RIPPING starts.

¡If the system is playing state, press and hold this

button, “FULL CD RIPPING” is displayed and CD

RIPPING starts.

¡During CD ripping, do not disconnect USB

device.

After CD-Ripping,a directory named “RIPPING FOLDER” will be created in your device.The file name is same with the disc.

4 Set the timer switch-on time.

a. Set the hour by pressing or button.

b. Press ENTER .

5 Set the timer switch-off time.

a. Set the hour by pressing or button.

b. Press ENTER.

Press or button

6 to adjust the volume level and press

ENTER.

•The source to be selected is displayed.

Note

◆ Don’t disconnected USB and AC Cord during CD-Ripping. This may cause

the file damage. If you want to stop CD-Ripping during CD-Ripping, you must

press stop Key first and after the CD Stopped, then you can remove the USB

device.

◆ If you disconnected USB device when CD Ripping, the main unit will be

power off and you may not delete the ripped file, In this case, please connect

the USB on the PC and backup the USB data on the PC first and then

formate the USB device .

◆ When the USB memory is not enough, it will be displayed “RIPPING

•The minutes flash.

c.Set the minutes by pressing or button.

d.Press ENTER.

•TIME OFF is displayed for a few seconds, followed by any switch- off time already set; you can now set the timer switch-off time.

•The minutes flash.

c.Set the minutes by pressing or button.

d.Press ENTER.

•VOL 10 is displayed, where 10 corresponds to the volume already set.

ERROR”.

◆ DTS-CD can’t for CD Ripping.

◆ With external HDD, FAT format the USB can be CD Ripping, but not NTFS.

The CD Ripping function of this product does not support all USB devices.

◆ When you use CD high speed search function or in the Pause or Stop mode,

the CD Ripping can’t work.

◆ During CD Ripping, do not deal impact. If is shocked while CD Ripping, CD

Ripping maybe disengage.

◆ Sometimes, some of USB devices, CD Ripping time is long.

◆ When CD Ripping completes or Stops, the CD will reload.

◆ When HDMI audio on, the CD RIPPING can’t work.

47

	Press or button		Press ENTER to		Press POWER to
	to select the source to				set the system to
			confirm the timer.
	be played when the
		8		9 standby mode.
7 system switches on.
• TUNER (radio) :				• is displayed to the top right of
a Press ENTER.					the time, indicating that the timer
b Select a preset station by pressing					has been set.		MISCELLANEOUS
	or .
				•	The system will switch on and
DVD/CD (compact disc) :
					off automatically at the required
• Load on or more compact disc.
• USB :Insert a USB.					times.
	• If the timer switch on and off times are identical, the word ERROR is displayed.
Note
	• If there is no disc or usb, when you select the “DVD, USB, it will automatically change to					48
	“TUNER”.