Connecting
External Components
Connecting
the FM and AM(MW/LW) Antennas
Connecting an External Analog Component
Example: Analog signal components such as a VCR, Camcorder, and TV.
R 
L
If FM reception is poor, connect an outdoor FM antenna (not supplied).
If AM reception is poor, connect an outdoor AM antenna(not supplied).
CONNECTIONS
AM Loop Antenna (supplied)
Audio Cable
If the external analog component has only one Audio Out, connect either left or right.
FM Antenna (supplied)
Snap the tabs on the loop into the slots of the base to assemble the AM loop antenna.
| WOOFER | |
S | L | |
P |
| |
E |
| |
A |
| |
K |
| |
E |
| |
R | R | |
S | ||
|
1 Connect Audio In on the DVD player to Audio Out on the external analog component.
•Be sure to match connector colors.
FM antenna connection
1.Connect the FM antenna supplied to the FM 75Ω
COAXIAL terminal as a temporary measure.
2.Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface.
•If reception is poor, connect an outdoor antenna. Before attaching a 75Ω coaxial cable (with a standard type connector), disconnect the supplied FM antenna.
AM(MW/LW) antenna connection
1.Connect the AM loop antenna supplied
to the AM and 
terminals.
2.If reception is poor, connect an outdoor single
2 Press AUX to select AUX.
•‘AUX’ appears in the display.
11
Cooling Fan | The cooling fan dissipates the heat generated inside the unit so that the unit can be operated | |
normally. The cooling fan is activated automatically to supply cool air to the unit. | ||
| ||
| Please observe the following cautions for your safety. | |
| • Make sure the unit is | |
| and may damage it. | |
| • Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a | |
| newspaper or cloth, heat may build up inside the unit and fire may result.) | |
| 12 |
