Setting the Clock
For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.
Disc Playback
Switch the system
1 on by pressing POWER button.
Press TIMER/CLOCK |
| Press ENTER. |
2 twice. |
| 3 The hour flashes. |
• CLOCK is displayed. |
| • Increase the hours : |
|
| • Decrease the hours : |
|
|
|
| Press OPEN/CLOSE button to open the |
| |
1 disc tray. | CONNECTIONS | ||
2 | Load a disc. | ||
| |||
• Place a disc gently into the tray with the disc’s label |
| ||
|
|
When the correct
4 hour is displayed, press ENTER. The minutes flash.
•Increase the minutes :
•Decrease the minutes :
5 |
| When the correct |
| time is displayed, | |
| press ENTER. | |
|
|
|
•"TIMER" appears in the display.
•The current time is now set.
Note |
•You can display the time, even when you are using another function, by pressing TIMER/CLOCK once.
facing up. |
3 Presstray. OPEN/CLOSE button to close the disc
DVD VCD CD
•Playback starts automatically.
Selecting the Video Format
Turn off the main unit and then press NTSC/PAL.
•By default, the video format is set to "PAL".
•Each time the button is pressed, the video format switches between "NTSC" and "PAL".
•Each country has a different video format standard.
•For normal playback, the video format of the disc must be the same as the video format of your TV.
MP3 JPEG
•Playback starts automatically.
•If the TV is on, a list of MP3s on the CD will appear on the TV screen.
DVD RECEIVERSMART NAVI
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girl
Checking the Remaining Time
Press the REMAIN button.
•For checking the total and remaining time of a title or chapter being played.
Each time the REMAIN button is pressed
Note | • | Depending on the content of the disc, the initial screen may appear different. | |
• | Depending on the recording mode, some | ||
| |||
| • | Table of contents of a | |
|
| on the disc. |
DVD
13
TITLE ELAPSED
TITLE REMAIN
VCD
CHAPTER ELAPSED | CD |
CHAPTER REMAIN
TRACK ELAPSED
TRACK REMAIN
TOTAL ELAPSED
TOTAL REMAIN
To stop playback,
press STOP during playback.
•If pressed once, “PRESS PLAY” is displayed and the stop position will be stored in memory. If PLAY/PAUSE
( ) button or ENTER button is pressed, playback resumes from the stop position. (This function works only with DVDs.)
•If pressed twice, “STOP” is displayed, and if
PLAY/PAUSE ( ) button is pressed, playback starts from the beginning.
To temporarily pause playback, press PLAY/PAUSE during
•To resume playback, press PLAY/PAUSE button again.
14