Basic Functions
Listening to Radio
Using buttons on the Remote Control
1.Press the FUNCTION button to select FM.
2.Tune in to the desired station.
•Automatic Tuning 1 : Press the STOP button to select PRE 01 and then press TUNING ( 
) buttons to select the preset station.
•Automatic Tuning 2 : Press the STOP button to select MANUAL and then press and hold the TUNING ( 
) button to automatically search for active broadcasting stations.
•Manual Tuning : Press the STOP button to select MANUAL and then briefly press the TUNING ( 
) button to increase or decrease the frequency incrementally.
Using buttons on the product
1.Press the F( 
) button to select FM .
2.Select a broadcast station.
•Automatic Tuning 1 : Press the STOP ( @ ) button to select PRESET and then press the [ ] buttons to select the preset station.
•Automatic Tuning 2 : Press the STOP ( @ ) button to select MANUAL and then press and hold the [ ] buttons to automatically search the band.
•Manual Tuning : Press the STOP ( @ ) button to select MANUAL and then press the [ ] buttons to tune in to a lower or higher frequency.
Setting Mono/Stereo
Press the MO/ST button.
• Each time the button is pressed, the sound switches between STEREO and
MONO.
•In a poor reception area, select MONO for a clear,
✎✎NOTE
`` This applies only when listening to an FM station.
Presetting Stations
Example : Presetting FM 89.10 in the memory
1. Press the FUNCTION button to select FM.
2. Press the STOP ( @ ) button on the top panel to select <MANUAL> mode.
3. Press the [ ] button on the top panel to select <89.10>.
4. Press the ENTER button.
• Number flashes on the display.
5. Press the [ ] buttons on the top panel to select preset number.
• You can select between 1 and 15 presets.
6. Press the ENTER button again.
• Press the ENTER button before number disappears from the display.
• Number disappears from the display and the station is stored in memory.
7. To preset another station, repeat steps 2 to 6.
• To tune in to a preset station, press the [ ] on the top panel to select a channel.
✎✎NOTE
`` You can also use TUNING ( 
) buttons on the remote control instead of [ or ] buttons in step 3,5,7 .
