
Basic Functions
Setting the Clock
For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.
1.Switch the system on by pressing the POWER button.
2. Press and hold TIMER/CLOCK button and then press the ENTER button.
Result: "CLOCK" is displayed.
3.Press ENTER.
Result: The hour flashes. `` Increase the hours:$ `` Decrease the hours:%
4.When the correct hour is displayed, press
ENTER.
Result: The minutes flashes.
`` Increase the minutes:$
`` Decrease the minutes:%
5.When the correct minute is displayed, press
ENTER.
Result: " TIMER" appears in the display.
`` The current time is now set.
✎✎NOTE
`` You can display the time, even when you are using another function, by pressing and hold the TIMER/CLOCK button once.
`` You can also use [ or ] on the front panel instead of$,%buttons in step 3,4.
Timer Function
The timer enables you to switch the system on or off at specific times automatically.
`` Before setting the timer, check that the current time is correct.
`` For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.
`` If you no longer want the system to switch on or off automatically, you must cancel the timer by pressing the TIMER ON/OFF button.
Example: You wish to wake up to music every morning.
1.Switch the system on by pressing
the POWER button.
2. Press and hold the TIMER/CLOCK button and then press $ or % buttons until TIMER is displayed.
3.Press the ENTER button.
Result: ON is displayed for a few seconds, you can set the timer
4.Set the timer switch-on time.
aPress the $ or %button.
bPress the ENTER button. Result: The minutes flash.
cPress the $ or % button.
dPress the ENTER button.
Result: OFF is displayed for a few seconds, you can now set the timer
5.Set the timer
Result: The minutes flash.
cPress the $ or % button.
dPress the ENTER button.
Result: VOL XX is displayed, where XX corresponds to the volume already set.
6.Press $ or % button to adjust the volume level and press the ENTER button.
Result: The source to be selected is displayed.
7.Press the $ or % button to select the desired source to be played when the system switches on.
`` FM (radio) : a Press the ENTER button.
b Select a preset station by press the $ or % button.
`` DVD/CD (compact disc): Load one audio CD.
`` USB : Connect the USB device.