Rear Panel

 

7

1

6

5

 

 

4

 

3

 

2

1.DC 24V (Power Supply In)

•Connect the DC power adaptor to the power supply jack, and then connect the AC power adaptor plug to a wall outlet.

2.2.0 CH Speaker Connector Terminals

The speaker connector terminals are located on the rear of the system.To achieve the correct sound quality, insert the speaker connector cables identified below into the correct speaker terminals on the back of the system.

•Left speaker (marked L).•Right speaker (marked R).3.ONLY FOR SERVICE•This jack is for service only. Please do not use.4.FM Antenna Connector Terminal1.Connect the FM antenna (supplied) to the FM Antenna jack.

2.Slowly move the antenna wire until you find a location where reception is good, then fasten it to a wall or other rigid surface.

3.If reception is poor, you may need to install an outdoor antenna. To do so, connect an outdoor FM antenna to FM antenna jack on the rear of the system using a 75Ω coaxial cable (not supplied).

5.HDMI OUT Jack

Outputs digital video and audio signals simultaneously using an HDMI cable.

6.VIDEO OUT JackConnect your TV's Video Input jack (VIDEO IN) to the VIDEO OUT jack.7.COMPONENT VIDEO OUTPUT JacksConnect a TV with Component video inputs to these jacks.

Accessories

Check for the supplied accessories below.

 

 

 

 

 

 

Video Cable

FM Antenna

User's Manual

Remote Control/

DC Adapter

Power Cord

Batteries

 

 

 

 

 

 

 

 

 

 

 

English 9