Basic Functions

Setting the Clock

For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.

1.Switch the system on by pressing the POWER ( ) button.2.Press the TIMER CLOCK button and then press the vbutton.

Result: "CLOCK" is displayed.

3.Press the vbutton.

Result: The hour flashes.

`` Decrease the hours: %

`` Increase the hours: $

4.When the correct hour is displayed, press the vbutton.

Result: The minutes flashes.

`` Decrease the minutes:%

`` Increase the minutes: $

5.When the correct minute is displayed, press the vbutton.

Result: " TIME" appears in the display.

`` The current time is now set. NOTE

\\ You can display the time, even when you are using another function, by pressing the TIMER CLOCK

button once.

Timer Function

The timer enables you to switch the system on or off at specific times automatically.

\\ Before setting the timer, check that the current time is correct.

\\ For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.

\\ If you no longer want the system to switch on or off

automatically, you must cancel the timer by pressing the TIMER ON/OFF button.

Example: You wish to wake up to music every morning.1.Switch the system on by pressing the POWER ( ) button.

2.Press the TIMER CLOCK button and then press the ▲ or ▼ buttons until TIME is displayed.

3.Press the vbutton.

Result: ON is displayed for a few seconds, you can set the timer switch-on time.4.Set the timer switch-on time.aPress the $ or % button.

bPress the v button. Result: The minutes flash.

cPress the $ or % button.dPress the v button.

Result: OFF is displayed for a few seconds, you can now set the timer switch-off time.

5.Set the timer switch-off time. a Press the $ or % button. b Press the v button.

Result: The minutes flash. c Press the $ or % button. d Press the v button.Result: VOL XX is displayed, where XX corresponds to the volume already set.6.Press $ or % button to adjust the volume level and press the vbutton.Result: The source to be selected is displayed.

7.Press the $ or %button to select the desired source to be played when the system switches on.

`` FM (radio) : a Press the vbutton.

b Select a preset station by press the $ or % button.

`` DVD/CD (compact disc): Load one audio CD.`` USB : Connect the USB device.8.Press the vbutton.Result: CHKREC (Do you want to record?) is displayed.9.Press the vbutton.

Result: REC N is displayed, you can press the $ or %button to select the REC Y or REC N, and then press vbutton.

1). If you select the REC N, it will cancel tuner timing recording even if you have already set the tuner timing recording.

22 English