Samsung MM-N4 manual Timer Function, Cancelling the Timer, If you select, Press TIimer On/Off

Timer Function

The timer enables you to switch the system on or off at specific times. GB Example: You wish to wake up to music every morning.

If you no longer want the system to be switched on or off automatically, you must cancel the timer.

Before setting the timer, check that the current time is correct.

For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.

1Switch the system on by pressing On/Standby.

2Press Timer/Clock until TIMER is displayed.

3Press Program/Set.

Result: ON TIME is displayed (instead of the equalizer symbols) for a few seconds, followed by any switch-on time already set; you can set the timer switch-on time.

4Set the timer switch-on time.

a Set the hour by pressing Tuning and . b Press Program/Set.

Result: The minutes flash.

c Set the minutes by pressing Tuning and . d Press Program/Set.

Result: OFF TIME is displayed (instead of the equalizer symbols) for a few seconds, followed by any switch-off time already set; you can now set the timer switch-off time.

5Set the timer switch-off time.

a Set the hour by pressing Tuning and . b Press Program/Set.

Result: The minutes flash.

c Set the minutes by pressing Tuning and . d Press Program/Set.

Result: VOL XX is displayed, where XX corresponds to the volume already set.

6Press Tuning and to adjust the volume level and press Program/Set.

Result: The source to be selected is displayed.

7Press Tuning and to select the source to be played when the system switches on.

If you select...	You must also...
TAPE (cassette)	Insert a recorded cassette in one of
	the decks before setting the system
	to standby.
TUNER (radio)	a Select the FM or AM frequency
		band by pressing Tuning			and
	b	.
		Press Program/Set.
	c Select a preset station by pressing
	a	Tuning	and	.
CD (compact disc)		Load one disc.

8Press On/Standby to set the system to standby mode.

Result: is displayed to the bottom left of the time, indicating that the timer has been set. The system will switch on and off automatically at the required times.

If the timer switch on and off times are identical, the word

ERROR is displayed.

On/standby	Timer	Timer/
	On/Off	Clock

	1 8			2
	EQ Preset	Power	Program
		Sound	/Set	AUX
	3 4 5	6 7	Mono/ST	TUNER
	Sleep CD Repeat
				Band
		TAPE
		CD
		VOL.
4 5	6 7	Tuning		4 5	6 7
	CD	Mode		CD

VOL.

Cancelling the Timer

After having set the timer, it will start automatically as shown by

the indication on the display. If you no longer wish to use the timer, you must cancel it.

You can stop the timer at any time (system on or in standby mode).

To...	Press TIimer On/Off
Cancel the timer	Once.
	Result:	is no longer displayed.
Restart the timer	Twice.
	Result:	is displayed again.

On/standby		Timer	Timer/
		On/Off	Clock
EQ Preset	Power	Program
	Sound	/Set	AUX
Sleep	CD Repeat	Mono/ST	TUNER

12