Setting the Clock, Selecting a Track

Demo/Dimmer Function

All functions available on the system can be viewed on the GB display and the display's brightness can be switched

between "on" and "off".

1	Press the DEMO/DIMMER button.
	Result: All functions available on the system appear on the front
	panel display.
	Each of these are explained in detail in this guide. Please refer
	to the relevant section.
2	Press the DEMO/DIMMER button again.
	Result: The Dimmer function is selected and the display darkens.

POWER	DEMO/
	DIMMER
		USB
1	2
TIMER	TIMER/CLOCK	PROGRAM/SET
ON/OFF
SLEEP	REP A-B	REPEAT
		3,5,7
MO/ST	COUNT RESET	TAPE SPEED
CD SYNC	SHUFFLE	REV.MODE

USB/MP3-CD/CD

	MUTE
		TUNING/
VOLUME		ALBUM4,6
SURROUND		4,6
MODE	EQ/S.BASS	MODE
		+10

Regarding the playback of CD-R/RW

In the case of an original CD-R(Recordable) recorded in audio CD format, CD-RW(Rewritable) and editing by the user, playback is processed on the respective completed status. (The player may not be played back according to the characteristics of the CD or recorded status.)

The CD-RW is comparably less reflexive than CD which causes more time delay to read.

Selecting the MP3-CD album and track

The album and track of the MP3-CD desired to listen may be selected on stopping or during playbacks.

1	You can select the album by pressing TUNING/ALBUM button
	on the remote control.
	Result: ALBUM is displayed.
2	To move the album, press the	or	button.

Album Movement

3 Press the DEMO/DIMMER button once again to brighten the front

panel display.

A display brightness control can only be performed while the system power is on.

Setting the Clock

our system is equipped with a clock which allows you to turn your system on and off automatically.

You should set the clock:

When you first purchase the micro-component system

After a power failure After unplugging the unit

For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.

1	Switch the system on by pressing Standby/On (					)
1	Switch the system on by pressing Standby/On (					)
2	Press TIMER /CLOCK twice.
	Result: CLOCK is displayed.
3	Press PROGRAM /SET.
	Result: The hour flashes.
4
4	To...				Press...
	Decrease the hours		..............................................
	Decrease the hours
	Increase the hours	..............................................
	Increase the hours
5	When the correct hour is displayed, press PROGRAM /SET.
	Result: The minutes flash.
6
6	To...				Press...
	Decrease the minutes			....................................
	Increase the minutes			..........................................
	Increase the minutes
7	When the correct time is displayed, press PROGRAM /SET.
	Result: The clock starts and is displayed, even when the system is in

standby mode.

You can display the time, even when you are using another function, by pressing TIMER /CLOCK once.

To replay the CD/MP3-CD/WMA-CD

This unit has been designed to playback the CDs: Audio CD, CD Text, CD-R, CD-RW,MP3-CDand WMA-CD.

Continued use of irregular shape CDs (heart-shape, octagonal, etc.) can damage the unit.

1	Select the CD function by pressing MP3-CD(		) button.


2	Press the PUSH EJECT (	) button.
	Result: The compartment opens.

3 Place your disc in the compartment, with the label on the disc facing upwards.

4 Close the compartment by pressing the PUSH EJECT ( ) button again until it clicks into place.

5 Press the MP3-CD( ) button.

Your CD Player will take a few moments to scan through all the tracks recorded on a particular MP3-CD

The English name of the song may be indicated on the display only if directly downloaded from the PC or if the purchased MP3-CD is sorted according to titles(directory).