Selecting a Stored Station, Improving Radio Reception

Checking and Changing Programmed

Tracks

You can check and change your selection of tracks at any time.

You must have selected at least one track.

1	Press STOP ( ) once if you have started listening to the selection.
2	Press PROGRAM / SET.
3	Each time you press Program/Set, the next selection is displayed.
3	Press PROGRAM / SET one or more times until the track to be changed
	is displayed.
4	Press	or	to select the new track.
5	Press PROGRAM / SET.
6	Press MP3-CD(		) to start listening to the selection.
	Result: The first track selected is played.
	You can change one or more tracks in your initial selection
					USB
			TIMER	2,3,5
			TIMER	TIMER/CLOCK	PROGRAM/SET
			ON/OFF
			SLEEP	REP A-B	REPEAT
			MO/ST	COUNT RESET	TAPE SPEED
			CD SYNC	SHUFFLE	REV.MODE
				TAPE
		4	1		4
				6
			USB/MP3-CD/CD

Searching for and Storing the Radio Stations

You can store up to:

15 FM stations

15 MW station

1		Switch the system on by pressing Standby/On (				)


2		Select the TUNER function by pressing TUNER/BAND.
3		Select the required frequency band by pressing TUNER/BAND again.
		Result:The appropriate indication is displayed:
		FM		Frequency Modulation
		AM(MW)		Medium Wave
4
4	To search for a station ...			Press Tuning Mode		...
		Manually		One or more	times until MANUAL is
				displayed.
		Automatically		One or more	times until AUTO is
				displayed.
5		Select the station to be stored by pressing			,	on the front panel
		to decrease or increase the frequency respectively.
		To scroll through the frequencies faster when searching manually,
		hold down the	,	on the front panel .
		The automatic search procedure may stop on a frequency that does
		not correspond to a radio station.
		If this happens, use the manual search mode.
6		Adjust the volume by:

Turning the VOLUME knob on the front panel or

Pressing the VOLUME+, - button on the remote control. 7 Select the FM stereo or mono mode by pressing MO/ST on

the remote control.

Searching for and Storing the Radio Stations(continued)

8	If you do not want to store the radio station found, revert to Step 4 and
	search for another station.
	Otherwise:
	a Press PROGRAM/SET
	Result: The program number is displayed for a few seconds.
	b Press TUNING	and	to assign a program number between 1
	and 15.
	c Press PROGRAM/SET to store the radio station.
	Result: The program number is no longer displayed and the station is
	stored.
9	To store any other radio frequencies required, repeat Steps 3 to 6.
	The PROGRAM function can be used to assign a new station to
	an existing program number.
				USB
		TIMER	TIMER/CLOCK	PROGRAM/SET8
		ON/OFF
		SLEEP	REP A-B	REPEAT
		MO/ST	COUNT RESET	TAPE SPEED
		CD SYNC	SHUFFLE	REV.MODE
			TAPE

USB/MP3-CD/CD 8

MUTE

TUNING/

VOLUMEALBUM

SURROUND	EQ/S.BASS	TUNING
MODE	EQ/S.BASS	MODE

Selecting a Stored Station

You can listen to a stored radio station as follows:

1	Switch the system on by pressing Standby/On (		).
1	Switch the system on by pressing Standby/On (		).
2	Select the TUNER function by pressing TUNER .
3	Select the required frequency band by pressing TUNER.
4	Select the radio station as follows.
	To listen to ...	Press ...

A stored station........................... a Press the TUNING MODE button

until “PRESET” is displayed.

b TUNING	and	to select the
required station.

Press TUNING MODE again to exit the stored station selection function.

You can improve the quality of radio reception by:

Rotating the FM or AM(MW) aerial

Testing the positions of the FM and AM(MW) aerials before fixing them permanently

If reception from a specific FM radio station is poor, press MO/ST to switch from stereo mode to mono. The quality of the sound will be improved.