Samsung MMB7RH/ELS, MM-B7 manual Connecting to an External Source, Speaker Connection

Connecting to an External Source

GB

The auxiliary input can be used to take advantage of the sound quality of your micro component system when listening to other sources.

Examples: A television

A video disc player

A Hi-Fi stereo video cassette recorder

To connect the external source, the source must have an audio output. In addition, you need an RCA connection cable.

1	Set the system to standby mode and disconnect it and the external
	source from the main.
2	Connect the audio cable to the rear of the micro component system.
	Connect the...			To the connector marked...
	Red jack			R (right)
	White jack			L (left)
		For optimum sound quality, do not invert the right and left
		channels.
3	Plug the system back into the main socket and press Standby/On
4	(		) to switch it on.
	Select the AUX source by pressing AUX.
	Result: AUX is displayed.
5	Switch the external source on.
6	Adjust the volume and balance as required:
		Volume		Equalizer

Example: You can watch a film and take advantage of stereo sound provided that the original sound track is in stereo (as if you were in a cinema).

	TUNER
Standby/On	Band
		Down	Tuning	Up
	CD		Mode
3	TAPE		Volume
Phones	AUX	Rec/Pause	REV.Mode	Sound
	4			Mode

Speaker Connection

Main Speaker Connection: Connect the Speaker cords (red/black) to the Main Speaker jacks of System

(Right Speaker) (Left Speaker)

DIGITAL

OUT

(OPTICAL)

Directions in Installing Speaker

Installation in a place near heating apparatus, under direct lay of light or with high humidity may cause performance degradation of the speaker.

Do not install on the wall or on a high place of pole or other unstable place to prevent any safety accident caused by falling of the speaker.

Do not take the speaker apart from TV or computer monitor. The speaker near the TV or computer monitor may influence the quality of the screen display.

8