Safety Precautions | Cleaning Your Micro Component | |
System | ||
|
GB
The following diagrams illustrate the precautions to be taken when using or moving your micro component system.
To obtain the best possible results from your micro compo- nent system, you must clean the following elements regularly:
Ambient operating conditions:
Ambient temperature | |
Humidity |
|
Do not expose the unit to direct sun radiation or other heat sources. This could lead to overheating and malfunction of the unit.
The outer casing
The compact disc player
The cassette players (heads, rollers and drive capstans)
Always unplug the system from the wall outlet:
Before cleaning it
If you are not going to be using it for a long time
Outer Casing
Clean the outer casing regularly using a soft cloth and a light detergent. Do not use abrasive powders, liquids or aerosol cleaners. Never let any liquids get into the system.
Compact Disc Player
1 Before playing a compact disc, clean it with a special CD cleaning agent. Do not use the same cleaning agents as for vinyl LP records. Carefully wipe the disc from the centre outward.
Do not place potted plants or vases on top of the unit. Moisture entering the unit could lead to dangerous electric shock and can cause equipment damage. In such events immediately disconnect the main plug from the socket.
2 | Regularly clean the player with a special cleaning disc (available from | |
| your local dealer). |
|
Tape Decks |
| |
1 | Press Push Eject( | ) to open the cassette deck. |
2 | Use a cotton bud and a special cassette cleaning agent to clean the: | |
| Head (1) |
|
| Rollers (2) |
|
During thunderstorms, disconnect
the main plug from the socket.
Drive capstans (3) Main voltage peaks due to light-
ning could damage the unit.
3
| VOLUME |
| UP |
| DOWN |
Remove the batteries from the | When using headphones, take care |
remote control, if not used for any | not to listen at excessive volumes. |
extended period. | Extended use of headphones at |
Leaking batteries can cause serious | high volumes will lead to hearing |
damage to the remote control. | damage. |
1 2
If you will not be using the remote control for a long time, remove the batteries to prevent corrosion.
Although your system is very
If the unit emits an unpleasant odor when in use, unplug it from the main supply and contact the
Do not place heavy items on the main lead. Main cable damage can lead to damage of the equipment (fire hazard) and can cause electric shock.
Do not remove any equipment panels. The inside of the unit
contains live components, which cause electric shock.
22
