Video CD Player Playback

In order to play back video CD, make sure that your unit is connected to your TV set.

This unit is designed for playback of video CD, version 1.1 and 2.0. Only with version 2.0, it is possible to call up the on screen menu function. This unit will not play back any other video CD other than 1.1 and 2.0 versions.

1

Turn on the Standby/On (

 

) switch and set the VCD mode.

 

2

Press the Open/Close (

 

) button on the unit to open the CD compartment.

 

 

Result: “OPEN” is displayed and the CD compartment opens.

3

Load a video-CD with the label facing upwards in the compartment.

4

Press the Open/Close (

 

) button again to close the CD compartment.

 

5

To playback:

 

 

 

 

 

 

 

In version 1.1, press the VCD/CD (

 

 

 

) button for direct access to

 

 

 

 

the film, as there is no menu-on-screen.

In version 2.0, load a video CD, “Video CD 2.0”, and “MENU ON”

are displayed on the TV screen. Press the VCD/CD ( ) button and the menu is displayed on the TV screen.

Select a number from the menu using Digit buttons on the remote control and press the VCD/CD ( ) button.

To return to the previous menu in the version 2.0, press the Return button on the remote control.

When playing a video-CD version 2.0, reading time on the display may take longer, depending on the disc’s contents.

6

Press VCD/CD (

 

 

 

 

) button on the remote control to receive a still

 

 

 

 

 

 

 

picture.

 

 

 

 

 

 

 

 

 

 

Result: Pause is displayed, a still picture appears and the sound is

 

muted.

 

 

 

 

 

 

 

 

 

7

To return to normal playback, press VCD/CD (

 

 

 

) button.

 

 

 

 

8

Press the Stop (

 

 

 

) button to stop playback.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Please make sure that the Video-CD to be played is not flawed optically, as this may cause a distorted sound or the unit to malfunction.

1

5,6,7

5

Search Functions

GB

You can find a certain passage faster during playback.This function is possible in CD or VCD Ver 1.1 or Ver 2.0 menu off mode.

1

 

 

 

 

To...

Press and hold down...

 

Scan forwards

 

 

 

 

 

 

 

 

 

 

 

2

Scan backwards

 

 

 

 

 

 

 

 

 

Release the Skip/Search buttons when the desired passage has

 

been found.

 

 

 

In the video CD version 1.1, where the disc’s contents are over 15 minutes long, you can scan up or down by intervals of five minutes.

3

 

 

To...

Press...

Scan forwards by 5 minute intervals

Scan backwards by 5 minute intervals

Result: The picture is still, and the disc’s contents are forwarded or reversed by 5 minute intervals. Playback then resumes from this new position.

In the Skip/Search or Scan mode, the sound can only be partially heard and the picture scenes will change sporadically, until the required passage has been found.

Time Search Function

(This function is available only during the playback of a CD/VCD)

Please use this function for reproducing a desired track in a certain time of playback.

1

Press the Time Search button.

2

Set a desired time by pressing the Digit buttons.

3

Press the VCD/CD (

 

 

 

) button.

 

 

 

 

 

 

 

 

 

 

2

3

1

15