Samsung MM-VB7 Selecting a Stored Station, Improving Radio Reception, Searching for and Storing the Radio Stations, Press, AM(MW), PROGRAM, PROGRAM, Mono/ST, Standby/On

Searching for and Storing the Radio Stations

GB

You can store up to:

15 FM stations

15 AM(MW) stations

1	Switch the system on by pressing Standby/On (		) .
2	Select the required frequency band by pressing TUNER (Band)
	again on the front panel.
	Result: The appropriate indication is displayed:
	FM	Frequency Modulation
	AM(MW)	Medium Wave
3	Press Tuning Mode one or more times until MANUAL is displayed.

Automatic tuning

Press and hold , on the remote control.

Press and hold , on the main unit.

Result: Automatically scans and tunes to the next available station.

	Manual tuning
		Press	or	on the remote control.
		Press	or		on the main unit.
		Result: Press the button repeatedly to tune in the desired station
			manually.
		PRESET function is explained in detail in the section “Selecting a
		Stored Station” on.
4 Select the station to be stored by pressing								,		(main unit)
or		,	(remote control) buttons to increase or decrease the
frequency respectively.
		To scroll through the frequencies faster when searching
		manually, hold down the				,	(main unit) or		,

(remote control) buttons.

The automatic search procedure may stop on a frequency that does not correspond to a radio station.

If this happens, use the manual search mode.

5 If you do not want to store the radio station found, revert to Step 4 and search for another station.

Otherwise:

aPress Program/Set.

Result: The PROGRAM is displayed for a few seconds.

bPress , (remote control) or , (main unit) to assign a program number between 1 and 15.

cPress Program/Set to store the radio station.

Result: PROGRAM is no longer displayed and the station is stored.

6 To store any other radio frequencies required, repeat Steps 3 to 5.

The PROGRAM function can be used to assign a new station to an existing program number.

2	5
4		3
1		4 5
		5
4 5	3	4 5
		2

Selecting a Stored Station

You can listen to a stored radio station as follows:

1	Switch the system on by pressing Standby/On (		) .
2	Select the required frequency band by pressing TUNER(Band) .
3	Select the radio station as follows.
	To listen to ...	Press ...
	Stored station	1. the Tuning Mode button until “PRESET”
		is displayed.

2., (remote control) or , (main unit) to select the required program.

2
1
3	3

Improving Radio Reception

You can improve the quality of radio reception by:

Rotating the FM or AM(MW) aerial

If reception from a specific FM radio station is poor, press Mono/ST. to switch from stereo mode to mono. The quality of the sound will be improved.

18