User’s Manual

Setup (SyncMaster 172B)

Connecting Your Monitor

Setup-General

1.Connect the DC Adapter for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet.

2.Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor.

3.Connect the monitor to the Macintosh computer using the D-SUB connection cable.

4.In the case of an old model Macintosh, you need to connect the monitor using a special Mac adaptor.

5.Turn on your computer and monitor. If your monitor displays an image, installation is complete.