User’s Manual

Setup (SyncMaster 172T)

Connecting Your Monitor

Setup-General

1.Connect the DC Adapter for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet.

2.Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor.

3.Connect the DVI Cable to the DVI Port on the back of your Monitor.

4.Connect the monitor to the Macintosh computer using the D-SUB connection cable.

5.In the case of an old model Macintosh, you need to connect the monitor using a special Mac adaptor.

6.Turn on your computer and monitor. If your monitor displays an image, installation is complete.