Problem | Solution | |
You can't find the | • Check that networking (wired or wireless) has been setup on the Extender device. | |
• If you are using a wireless connection, ensure that you have connected to the proper access point. | ||
Extender device on | • If your home has multiple networks (multiple routers) ensure that your Media Center computer and the | |
your computer. | Extender are on the same network (router). | |
| • If you are using a | |
You can find the | • You can only have the Extender associated to one computer at a time; ensure that it has been removed from | |
any previous computers that are in the home. | ||
Extender device on | ||
• You can try to reset the Extender device using the reset menu of the Extender setup. | ||
your computer, but it | ||
fails to setup in Vista. | • Try restarting both devices. Shut off the Extender device. Restart the computer and wait for it to fully start; | |
| make sure Media Center has started as well. Then turn back on the Extender device and try association again. | |
You can't find |
| |
your files on the | • Check that the files are in a watched folder in Vista Media Center. If they are not, add the folder containing | |
Vista Media Center | ||
the files by selecting Tasks > settings > Library Setup > Add Folders. | ||
or Media Center | ||
| ||
Extender. |
| |
| • Check the batteries (the TV should indicate activity if it is receiving a signal). | |
Remote control | • Check that you are pointing the remote control directly at the TV. | |
• Check that the Samsung TV supports Anynet+ (2008 and later models). | ||
does not work. | • Anynet+ | |
| • If you connect your Extender after the TV is on, select the Searching Connections menu on the TV to search | |
| for attached devices. (see page 11) |
42