Operation
Selecting the Display Weight
The first time you plug the power cord into an outlet, or after there has been an interruption in powerthe display will show all. At this point, you can select the weight system for the display. You can choose between pounds(LBS) or kilograms (KG). To do so you can choose between pounds(LBS) and kilograms(KG).
1 Press “0” immediately after plugging in your microwave. The display will show:
START ENTER TIME HEAT MICRO
Kg | g | Oz Lbs QTY | Kg | g | Oz. Lbs. QTY. |
|
|
|
If the display does not shows “Kg”, you will need to unplug the microwave and then plug it in again in order to change to the weight selection.
2 Press “0” repeatedly to select the weight system you wish to use:
Kg | g | Oz. Lbs. | QTY. |
|
|
|
|
When you have selected the weight system you want to use, press the Stop/Clear button to end this procedure.
Setting the Clock
1 Press the Clock Button. The display will show:
START ENTER COOK TIME HEAT MICRO
Kg g Oz Lbs QTY
2 Use the Number buttons to enter the current time. You must press at least three numbers to set the clock. For example, if the current time is 5:00, enter 5,0,0.
3 Press the Clock button again. A colon will blink, indicating that the time is set.
If there is a power interruption, you will need to reset the clock. You can check the current time while cooking is in progress by pressing the Clock button.
8
