10 Skip Function
Press the +10 or
The unit will skip as many as 10 tracks forward or 10 tracks back from the current track.
CD Programming
This function is not available during playback of an
•You can program the playback order of up to 24 tracks of your choice.
•However, you must stop playing the CD before selecting tracks.
1.While in CD playback mode, press the STOP(@) button to stop playing the CD.
2.Press the ENTER ( 
) button to display the message below:
(01= program number,
3.Use the [ or ] button to move to a desired track.
•Press [ to move to the previous track.
•Press ] to move to the next track.
4.Press the ENTER ( 
) button to confirm
your selection. The selection is stored and is displayed.
5.To select additional tracks, follow Steps 3 to 4 above.
6.Press the PLAY (+) button to play the programmed tracks.
7.Press the STOP(@) button to stop playing the programmed tracks, Press the STOP (@) button again to cancel playing the programmed tracks.
•If you open the disc tray or turn off the product, your programming will be canceled.
➣➣In CD Program mode, if you press the USB REC or the AUTO CHANGE buttons, these functions will not work, and the unit will dis- play "PROG".
Checking or Editing the Programmed Tracks
You can check a list of programmed tracks and edit them as you want.
1.If a programmed track is being played, press the STOP (@) button once.
2.Press the ENTER ( 
) button twice to display the message below:
(C=Check, 01= program number)
➣➣If a total of 24 tracks are already pro- grammed, “C” will be displayed rather than “P” in the display.
3.Press the ENTER (
) button repeatedly until the desired track is displayed.
4.Press the [ or ] button to select a different track.
5.Press the ENTER (
) button to confirm your selection.
6.To play the programmed tracks, press the PLAY (+) button.
Auto Change Function
You can play a disc followed by a USB continuously.
1.Press the AUTO CHANGE button.
Each time you press this button, the mode will switch as follows:
AUTO CHANGE ON ; AUTO CHANGE OFF
•When the auto change mode is "ON", the unit will play the Disc ; USB 1 ; USB 2 continuously.
•When the auto change mode is "ON", if you press the POWER button, FUNCTION button, or the OPEN/CLOSE button, the auto change function automatically switches to "OFF" mode.
•When the USB is playing, if you disconnected the USB, the auto change function automatically switches to "OFF" mode.
•When the auto change mode is "ON", the unit cannot record.
•When the auto change mode is "ON", the REPEAT and SLEEP functions automatically change to OFF.
•When the auto change mode is "ON", the CD REC SPEED, USB 2 REC, REPEAT, PROGRAM, DELETE and SLEEP functions do not work, and the unit displays "AUTO CHANGE ON".
•When DISC play ends, if there's no USB 1, the unit will play music from USB 2.
•When DISC play ends, if there's no USB 1 and USB 2, the unit will continue to play the disc.
•When USB 2 play ends, if there's no DISC, the unit will play music from USB 1.
