Samsung MX-H730/XN, MX-H630/EN, MX-H730/EN, MX-H630/XN manual Recording Function, Recording Speed

Models: MX-H730/XN MX-H730/EN MX-H630/XN MX-H630/EN

1 18
Download 18 pages 50.19 Kb
Page 14
Image 14

Recording Function

You can record from a CD, radio broadcast, or an external source to a USB storage device.

1. Connect an external USB storage device to the USB (

)

jack on your product.

 

2.Play a disc, tune to a station, or connect an external source to your product.

CD

Press the MP3/CD button on the main unit to select the CD function.

Press the OPEN/CLOSE button to open the disc tray.

Insert a CD and press the OPEN/CLOSE button to close the disc tray.

Use the CD selection buttons ( [ or ] ) to select the desired song.

Tuner

Select TUNER by pressing the TUNER/AUX button.

Tune to a station you want to record.

External Source

Connect an External Component/MP3 player to your product.

Press the TUNER/AUX button to select <AUX> input.

Play a song from the external device.

3.Press the USB REC button to start recording.

CD

“TRACK RECORDING” is displayed and CD recording starts.

Press and hold the USB REC button to start recording all tracks on the disc. "FULL CD RECORDING" is displayed.

MP3-CD

Press the USB REC button. The currently playing file is copied onto the USB device.

Press and hold the USB REC button. All the files in the current folder are copied onto the USB device.

When you connect a Microphone, press the USB REC button. The currently playing file is recorded onto the USB device, and the sound from the Microphone is recorded too.

MP3 RECORDING: "MP3 RECORDING""RECORD"

CD COPY: “CHECK”“START”“COPY XX”“COPY END”

is displayed. When the recording is done, “STOP” will be displayed.

If there is a duplicate file name, "FILE EXIST" is displayed, and the function is canceled.

Tuner /External Source

RECORD is displayed.

4.To stop recording, press the STOP (@) button. The unit automatically creates and saves recorded files in .MP3 format (SAM-XXXX.MP3).

5.After recording, a directory named “RECORDING(DISCxxxx)”(FULL CD RECORDING), “RECORDING”(TRACK RECORDING), “CD COPY”(MP3 CD), “MP3 RECORDING”(MP3 CD), “TUNER RECORDING” or “AUX RECORDING” is created on your USB device.

• Do not disconnect the USB or the AC Cord during recording as this may cause damage to the file.

WMA/MP2 files can be copied but not recorded.

If you disconnect the USB device during a recording, the unfinished recording file may get damaged and cannot be deleted. If this occurs, please connect the USB device to a PC and backup the data stored in the USB first, and then format it.

When the USB memory has insufficient free space, the system will display “NOT ENOUGH MEMORY”.

The USB device or HDD you are recording to must be formatted in the FAT file system. The NTFS file system is not supported.

When you use the CD high speed search function, CD recording is not available.

Sometimes, the recording time may be longer with some USB devices.

In the program mode, you can't use the CD recording function.

The equalizer is set to "OFF" automatically and is not available during a CD recording.

The GIGA SOUND function is set to "OFF" automatically and is not available during a CD recording.

The REPEAT function is set to "OFF" automatically and is not available during a CD recording.

If you use the MIC function during a CD recording, the sound from the microphone will be recorded.

You cannot record the radio when searching or if no stations are available in the Tuner mode.

Note that setting the input level too loud when recording music from an external device through the AUX or USB channel may cause noise in the recording. If this occurs, lower the external device’s volume level.

The maximum TUNER/AUX recording time is 5 hours.

Recording Speed

You can select the recording speed before recording.

Each time you press the CD REC SPEED button on the remote control, the recording speed will change as follows:

RECORD SPD X 1 ; RECORD SPD X 3

When you record from the tuner or an external source, you cannot change the recording speed.

If you select RECORD SPD X 3, sound is not produced during the recording.

If you connected the microphone, you have one recording speed mode available: RECORD SPD X 1.

During recording, if you disconnect the microphone, the recording will stop. If you reconnect the microphone, the recording will not restart.

14 English

Page 14
Image 14
Samsung MX-H730/XN, MX-H630/EN, MX-H730/EN Recording Function, Recording Speed, Tuner /External Source Record is displayed