Rear Panel
1
2 | 3 | 4 5 67 |
02 Getting Started
Cooling fan
•The fan operates while the unit is powered on.
1If you set the unit to the minimum volume, the fan won't operate. Secure a minimum 6 inches (15 cm) of clear space on from all sides of the fan when installing the product.
2 | POWER |
|
• Insert only the provided power cable. | ||
| 2.2 CH Speaker Terminals |
|
| 1. To achieve the correct sound quality, | |
| when you connect the speakers, | |
| match the color of the speaker plugs | |
| to the color of the speaker jacks. See | |
| below. |
|
3 | • LEFT channel (marked | , White/ |
| Purple). |
|
| • RIGHT channel (marked | , Red/ |
| Purple). |
|
| • Don't force the Purple SUBWOOFER | |
| connector into the White or Red | |
| speaker jack. |
|
| ||
4 LED Terminals for Speaker Beat Waving. | ||
|
|
|
| ONLY FOR SERVICE |
|
5 | • This jack is for testing only. Please do | |
| not use. |
|
|
|
|
|
| 9 |
AUX IN 2 Terminals
1. Use an Audio Cable (not supplied) to connect AUX IN 2 on the product to Audio Out on an external analog output device.
• Be sure to match connector colors.
•If the external analog output device
6 has only one Audio Out jack, connect either left or right.
•Press the TUNER/AUX button to select AUX 2.
•If the product is in AUX mode for more than eight hours and no buttons on the front panel or remote are pushed, the system will turn off.
FM Antenna Terminals
1.Connect the FM antenna to the FM antenna connector terminal.
2.Slowly move the antenna wire until you find a location where reception is good, then fasten it to a wall or other rigid
7surface.
3.If reception is poor, you may need to install an outdoor antenna. To do so, connect an outdoor FM antenna to the FM socket on the rear of the system using a 75Ω coaxial cable (not supplied).
English
