Samsung N140 manual Upgrading Memory, Replacing the Memory, Fixing Screw

Upgrading Memory

A memory is installed in the memory slot at the bottom of this computer. The procedures to replace the memory are described below.

 Replace new memory only after shutting the computer down completely. Do not replace memory when the computer is in Sleep mode.

Disconnect main power plug and remove the battery before continuing.

Only use the same type of memory as specified in the Product Specification.

Replacing the Memory

1 Remove the screw on the memory compartment cover at the bottom of the computer using a screw driver.

2 Pull the memory module latches outward. The memory module will pop up.

Remove the memory module out at an angle of 30 degrees.

Fixing Screw

99