•Be careful in handling the metal plate of the memory door.

Installing a Memory Module

Handle a memory module carefully. Hold them only by the edges.

To install a memory module:

1.Turn the computer over so that the bottom faces up.

2.Using a screwdriver, remove the screw that holds the memory-module compartment door in place (Figure 25).

Figure 25. Removing the Memory Module Compartment Door

3.Grasp the edge of the door and pull the door off the chassis.

4.Remove installed modules if necessary:

When removing modules, pull on the plastic portion of the connector slots tabs only. Do not pull on the metal part of the tabs, or you may damage the tabs.

Using Options 105