Installing Modem Driver in Windows NT 4.0 (Modem Module Driver)

You can install the modem driver as shown in the following.

The figures illustrated in this manual may not be identical as those on you system. The figures in this manual were developed using the SENS PT56MDW Modem installation as a reference.

At the BIOS setup, Installed OS must be set as ’Other/NT4.0’. When you install the driver or remove the driver, you must log in as Administrator.

If your modem driver is already installed, you must remove the existing mode driver first. Remove the driver by selecting SENS PT56MDW Modem at Add/ Remove programs of Control panel.

Install the Modem Driver

1.Insert the CD or floppy diskette that has the modem driver on it.

2.Click the Start button, and then click Run. Locate the directory that contain the modem driver and run Setup.exe. (’D’ refers to the CD-ROM driver.) "D:\NT4\Driver\Modemonly\Setup.exe"

3.Click the Next button when the Setup Wizard dialog appears.

4.Click the Next button when the dialo for Resource Settings appears

5.Select current country and click OK button when the Country Selection dialog appears.

6.Click finish button when the modem driver is inserted successfully. In order to complete the driver installation, you must restart the system.

Modem driver installation confirmation

After the modem driver is installed, you can check if the modem driver is installed properly.

1.Click the Start button, point to Settings, and then click Control Panel.

2.Double-click the Modem icon.

48 Using the Modem