3.Check if the modem is attached to the communications port correctly.
Installing the Modem Driver in Windows Millennium (Modem/LAN Module Driver)
Install the Modem Driver
You don't need to install the modem driver because WinME already has this Modem driver. But, This driver show modem name as Lucent Win Modem at the device manager. You can see SENS LT56IDW Modem at the device manager if you wish to install the driver from System Recovery CD.
Install the modem driver according to the instruction below.
1.Insert the CD or floppy diskette that has a modem driver in it.
2.Click the Start button, and then click Run. Locate the directory that contain modem driver and run setup.exe.
(ex, D:\WinME\Drivers\Modem\Setup.exe )
3.Click OK button in the confirming dialog.
4.Setup copies the driver files onto the system.
5.Restart the system by clicking OK button.
Selecting a Country
You have to check if the country is selected correctly before you use the modem.
If the country is not selected correctly at th I am in this country/region of the Dialing Properties dialog, the modem may not work properly. So, you must check if the country you're calling from is selected appropriately and then use the modem. If your modem only supports "Domestic", you must select the country where you bought your notebook computer. And, if you use the modem in other countries, you modem may not work properly. If your modem supports "Worldwide", please check with your local distributor which countries can be supported by the SENS modem.
1. Click the Start button, point to Settings, and then click Control Panel.
Using the Modem 49