Exit from the SYSTEM SETUP menu
3. CAMERA SETUP
| CAMERA SETUP | |
| > CAMERA SELECT | CH1 |
| CAMERA RECORD | ON |
| MOTION DETECTION | ON |
| MOTION SENSITIVITY | 5 |
| BRIGHTNESS | STANDARD |
| CONTRAST | STANDARD |
| HUE | STANDARD |
| EXIT |
|
|
|
|
Contents: |
| |
Press the MENU button to go into the main menu.
Use the ▲ or ▼ button to select items.
Press the ◄ or ► button to confirm the selection.
Press MENU to escape to exit the set up mode.
c | CAMERA SELECT | CH1(CH1~CH4) |
| Use ◄ or ► button to select the camera from CAM 1 – CAM 4 to be adjusted. | |
2 | CAMERA RECORD | ON(ON/OFF) |
| Use ◄ or ► button to select ON/OFF recording. | |
3 | MOTION DETECTION | ON(ON/OFF) |
Use ◄ or ► button to select ON/OFF motion detection.
4MOTION SENSITIVITY(1~10)
Use ◄ or ► button to adjust sensitivity of motion detection for selected camera. Initial number from 1 to 10, default value is 5(STANDARD).
5BRIGHTNESS STANDARD(1~10)
Use ◄ or ► button to adjust the brightness of the selected camera. Initial number is 5 (STANDARD).
6CONTRAST STANDARD(1~10)
Use ◄ or ► button to adjust the contrast of the selected camera. Initial number is 5 (STANDARD).
7HUE STANDARD(1~10)
Use ◄ or ► button to adjust the hue of the selected camera. Initial number is 5 (STANDARD).
8EXIT
Exit from the CAMERA SETUP menu
4. RECORD SETUP
RECORD SETUP |
| |
> RECORD MODE |
| MUX |
NORMAL RECORD | FPS | 15P |
ALARM RECORD | FPS | 15P |
ALARM RECORD DWELL | 5SEC | |
RECORD QUALITY |
| HIGH |
MOTION ENENT MIGRATION | OFF | |
EXIT |
|
|
Press the MENU button to go into the main menu.
Use the ▲ or ▼ button to select items.
Press the ◄ or ► button to confirm the selection.
Press MENU to escape to exit the set up mode.
Contents: |
| |
c | RECORD MODE | MUX(MUX/QUAD) |
| Use ◄ or ► button to select MUX or QUAD recording. | |
d | NORMAL RECORD FPS | 15P (1~5P/7P/10P/15P/30P) |
| Use ◄ or ► button to select recording speed. | |
| 15P means 15 fields per second, 30P is the highest speed, and 1P is the lowest. There are | |
| a total of nine speeds you can choose from. (FPS: Field per second) | |
| Note: PAL: (1~4P/6P/8P/12P/25P) NTSC=15P, PAL=12P on default. | |
e | ALARM RECORD FPS | 15P (1~5P/7P/10P/15P/30P) |
| Use ◄ or ► button to select alarm recording speed when external alarm or motion | |
5
