Samsung NP-N120-KA02AE manual Wired LAN Related, Wake On LAN function,  S3 WOL Wake On LAN

Wired LAN Related

Q<Wake On LAN> function

A<Wake On LAN> is a function that activates the system from Sleep mode when a signal (such as a ping or magic packet command) arrives over the network (wired LAN).

S3 WOL (Wake On LAN)

zSelect Device Manager > Network Adapters and double-click the

Marvell Yukon 88E8040 PCI-E Fast Ethernet Controller item.

The above driver name may be different.

xFrom Power management tab, select “Allow this device to bring the computer out of standby”, then click OK. Restart the system.

-If the system wake up from Sleep mode even though there is no received signal, use the system after disabling the <Wake On LAN> function.

-The LAN LED may not be turned off if System is shutdown without disabling the WOL <Wake on LAN> option.

-Connecting a wired LAN while using a wireless LAN may not activate the <Wake On LAN> function. Set the Wireless LAN to Disable to use the <Wake On LAN> function.

For Windows 7, Wake On LAN is not supported Ping.

QWhen I am connected to a 100Mbps/1Gbps wired LAN and the computer exits Sleep/hibernation mode, a message appears informing you of a connection to a 10Mbps/100Mbps wired LAN.

AWhen the computer exits standby/ hibernate mode, restoring the network takes about 3 seconds.

When the network is restored, it operates at 100Mbps/1Gbps.

141