Samsung NP-N120-KA04SG, NP-N120-KA04FR, NP-N120-JA01FR, NP-N120-KA01FR, NP-N120-KA02FR manual 145

A6 Check the AP settings as follows. (The following is recommended for a standard environment and thus may differ according to the specific wireless network environment.)

When several APs are present simultaneously, check the channel settings for each AP. When different APs are using nearby channels, interference may occur between the electronic waves. Set the AP channels further apart from each other. (Ex:

Ch1, Ch5, Ch9, Ch13)

When an AP’s SSID (Service Set ID) option is set to “Hide”, you cannot search for that AP on the computer. We recommend unselecting the “Hide” option for the AP. The SSID is a name used for distinguishing one wireless LAN from another wireless LAN.

It is recommended using Long Preamble. Preamble is a signal for data transmission synchronization. Short Preamble may be supported by some types of APs but may cause compatibility problems.

It is recommended using a static IP.

Since static channel selection is more reliable than auto channel selection, it is recommended using a static channel.

QI have set the same IP address for both the wireless and wired connections, but they do not work properly.

AYou cannot use wireless and wired connections using the same IP address. To sequentially use both the wired and wireless connections with the same IP address, you need to set the currently not needed connection to Do Not Use in the Network Connections of the Control Panel.

145