Samsung NP-X22A001/SEF, NP-X22A003/SEG manual Security Settings, Network authentication The network

7 Enter the network authentication, data encryption (WEP), encryption level, key index, and wireless security password configured for the target access point or computer-to-computer network in the Security Settings window, and click Next.

	The network authentication, data encryption
	(WEP), key index, and password of a access point
Note	are configured in the access point management
	program.
	For information on the security information, check
	the security settings of the access point or ask your
	wireless network administrator.
	To connect to an existing computer-to-computer
	(Ad Hoc) network, enter the password configured
	when creating the computer-to-computer network
	for the first time. You do not need to enter network
	authentication or key index.
	Security Settings
	■ Network authentication: The network
Note	authentication option includes Open System and
	Shared Key. When you select Open System, no
	authentication is applied (however, encryption is
	supported). When you select Shared Key, a WEP
	key is used for authentication. The default setting
	is Open System.

■Data encryption (WEP): The IEEE 802.11 WEP (Wired Equivalent Privacy) standard defines two levels of encryption, a 64-bit key (this is sometimes represented by 40bits) and a 128-bit key.

■Key index: Select the current encryption key index used by the access point out of 1 to 4.

■To use encryption key: Click Use pass phrase to activate, and enter 5 (for 64-bit) or 13 (for 128-bit) alphanumeric characters (represented by 0-9, a-z, or A-Z).

8 The Done window appears, click OK.

When a wireless connection to an access point is established, the connection icon () appears in front of the name of the connected profile.

83